Makita EM406MP - User Manual

Questions and Answers

T
Theresa OdonnellAug 9, 2025
Why is my Makita Lawn and Garden Equipment vibrating abnormally?
- A
  Andrew YangAug 9, 2025
  If your Makita Lawn and Garden Equipment vibrates abnormally, several issues could be the cause. The cutting tool might be broken, bent, or worn, requiring a replacement. Alternatively, the cutting tool may be loosely attached and need tightening. If you're using a nylon cutting cord, one end may have broken, unbalancing the cutting head; try feeding the cord by tapping the head on the ground. Also, check for irregular attachment of the cutting tool and ensure it's properly attached. If none of these resolves the vibration, there may be an abnormal drive system, in which case contact an authorized service center for repairs.
A
Alexis GarzaAug 16, 2025
How to fix a Makita Lawn and Garden Equipment cutting tool that does not rotate?
- D
  David MontoyaAug 17, 2025
  If the cutting tool on your Makita Lawn and Garden Equipment isn't rotating, it could be due to a few reasons. First, check if the cutting tool is loosely attached and tighten it securely. It's also possible that the cutting tool has caught a twig or other foreign matter, so remove any obstructions. If neither of these solutions works, the drive system may be abnormal, and you should contact an authorized service center for repairs.
G
gsimpsonAug 23, 2025
What to do if the nylon cutting cord is not cut off at the correct length on my Makita Lawn and Garden Equipment?
- R
  Ryan SerranoAug 25, 2025
  If the nylon cutting cord on your Makita Lawn and Garden Equipment isn't being cut to the correct length, it could be because the cord cutter on the protector is damaged or missing, in which case you should contact an authorized service center for repairs. Another possibility is that the cord extends past the protector, and you should rewind the cord.
S
steven80Aug 31, 2025
Why is the nylon cutting cord not feeding on my Makita Lawn and Garden Equipment?
- R
  Robert GonzalesAug 31, 2025
  If the nylon cutting cord on your Makita Lawn and Garden Equipment isn't feeding, it's possible that the cord is either used up or tangled in the spool. Try rewinding the cord to resolve this issue.