To Next PageTo Next PageWhy is my Makita EM2600L performance insufficient?
If your Makita Trimmer's performance is lacking, the air filter or carburetor might be contaminated. Also, the muffler could be clogged, or the exhaust duct in the cylinder might be blocked.
Why does my Makita EM2600L have warm start problems?
If you're experiencing warm start problems with your Makita Trimmer, the I-Stop Switch (on/off)/Start-Stop Switch might be operated. Alternatively, there could be a wiring fault or short circuit, a defective spark plug or connector, or a faulty ignition module.
General| Engine Type | 2-stroke |
|---|---|
| Power Rating | 1.1 HP |
| Fuel Tank Capacity | 0.5 L |
| Cutting Width | 40 cm |
| Shaft Type | Straight |
| Handle Type | Loop handle |
| Displacement | 25.4 cc |
Provides general guidance for safe operation and user responsibilities.
Defines the specific applications for the brush cutter/string trimmer.
Details necessary protective gear for safe operation.
Outlines potential hazards even with prescribed use.
Instructions on how to safely start the brush cutter.
Detailed steps for starting the engine and safe operation practices.
Guidelines for safe fuel handling and refueling procedures.
Instructions on how to operate the equipment safely.
Explains the phenomenon of kickback and its causes.
Advice on how to avoid kickbacks.
Information on choosing and using appropriate cutting tools.
Guidelines for regular equipment maintenance.
Prohibits straightening or welding damaged cutting tools to prevent accidents.
Provides immediate actions to take in case of an accident.
Discusses vibration effects and mitigation.
Lists model variants, dimensions, weight, and engine specifications.
Details engine performance, speeds, fuel capacity, and components.
Identifies components for the EM2600U model with U handle.
Identifies components for the EM2600L model with loop handle.
Steps for mounting the handle on U handle models.
Steps for mounting the handle on loop handle models.
Instructions for attaching the cutting tool guard for safety.
Mounting the protector for metal blades.
Attaching the guard for the nylon cutting head.
Steps to attach the metal cutter blade to the shaft.
Steps to attach the nylon cutting head to the shaft.
Precautions for safely handling fuel and preventing skin/eye irritation.
Details on the correct fuel and oil mixture ratio for the engine.
Step-by-step guide on how to refuel the equipment safely.
Guidelines for storing fuel safely and for limited periods.
How to attach, adjust, and detach the shoulder strap.
Safely placing and starting the brush cutter.
Specific cold start procedure for U handle models.
Specific cold start procedure for loop handle models.
Specific warm start procedure for U handle models.
Specific warm start procedure for loop handle models.
Guidance on engine speed and safe stopping procedures.
Advises professional resharpening and balancing of cutting tools.
How to operate the nylon cutting head for effective cutting.
Step-by-step instructions for replacing the nylon cutting cord.
Daily checks and maintenance tasks to perform.
Steps to clean the air filter for optimal engine performance.
How to check, clean, and adjust the spark plug gap.
Instructions on greasing the gear case for longevity.
Inspecting and replacing the fuel filter for proper fuel supply.
Steps for preparing the equipment for long-term storage.
Summary of general, daily, weekly, and quarterly maintenance tasks.
Diagnosing and resolving common starting and performance problems.
Details the duration and scope of the manufacturer's warranty.
Outlines the owner's obligations for maintaining warranty validity.
Specifies conditions for warranty claims and coverage.
Lists specific parts covered under the emissions warranty.
Details scheduled maintenance and its impact on warranty.
Explains the applicability of the federal emission warranty.
Specifies the duration of the emission component warranty.
Lists parts included in the Emission Component Defect Warranty.
Lists conditions and parts not covered by the warranty.
Reiteration of owner's responsibility for maintenance and care.
Emphasizes the importance of maintenance for warranty.
Instructions on how to initiate a warranty claim.
