EasyManua.ls Logo

Makita EM4341 - User Manual

Makita EM4341
28 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
A
English / Italiano / Spanish / Português
Brush Cutter
Decespugliatore
Desbrozadora
Cortador de Grama
EM4340
EM4340L
Grass Trimmer
Tagliabordi
Cortabordes
Aparador de Grama
EM4341
INSTRUCTION MANUAL
ISTRUZIONI D’USO
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUÇÕES
Important:
Read this instruction manual carefully before putting the Brush Cutter/Grass Trimmer into operation and strictly observe the safety
regulations! Preserve instruction manual carefully!
Importante:
Prima di mettere in funzione il decespugliatore/tagliabordi, leggere attentamente il presente manuale; rispettare rigorosamente le norme
di sicurezza! Conservare il manuale delle istruzioni per l’uso!
Importante:
Leer cuidadosamente este manual de instrucciones antes de poner en marcha la máquina y observar estrictamente las normas de
seguridad. Conservar este manual de instrucciones con cuidado.
Importante
Leia este manual cuidadosamente antes de pôr o Cortador/Aparador de Grama em funcionamento e observe rigorosamente as normas
de segurança. Conserve este manual de instruções com cuidado.
EM4340 EM4341EM4340L

Table of Contents

Questions and Answers

  • A
    Allison HuynhAug 15, 2025
    Why does my Makita EM4341 Trimmer engine stop soon or not increase speed?
    • R
      Rachel ClarkAug 15, 2025
      If your Makita Trimmer engine stops soon after starting, or the engine speed doesn't increase, it might be due to insufficient warm-up; perform a proper warm-up operation. Also, check that the choke lever is set to “OPEN” after the engine is warmed up. Other potential causes include a clogged fuel filter (clean it) or a contaminated air cleaner (clean it). If these steps don't resolve the issue, the carburetor or drive system might be abnormal, requiring professional inspection and maintenance.
  • J
    Jeffrey BrayAug 20, 2025
    What causes abnormal vibrations in my Makita Trimmer?
    • D
      danielsmonicaAug 20, 2025
      If your Makita Trimmer's main unit vibrates abnormally, it could be due to a broken, bent, or worn cutter blade, which would need replacement. Another cause could be a loosened cutter blade-tightening nut; ensure it's securely tightened. Also, check if the convex part of the cutter blade and cutter blade support fitting are shifted and attach them securely. If the issue persists, the drive system may be abnormal, requiring professional inspection and maintenance.
  • L
    Lisa StarkAug 26, 2025
    What to do if the cutter blade does not rotate on my Makita EM4341?
    • Y
      Yolanda LopezAug 26, 2025
      If the cutter blade on your Makita Trimmer does not rotate, start by checking if the cutter blade-tightening nut is loose and tighten it securely. Also, inspect the cutter blade and dispersion-preventing cover for any caught twigs or foreign matter and remove them. If the issue persists, the drive system may be abnormal, requiring professional inspection and maintenance.
  • C
    Christopher PetersAug 30, 2025
    What to do if the cutter blade does not stop immediately on my Makita EM4341?
    • T
      Tracy GrantAug 31, 2025
      If the cutter blade on your Makita Trimmer doesn't stop immediately, it could be due to high idling rotation, which requires adjustment. Another cause might be a detached throttle wire; ensure it is securely attached. For any other issues, request inspection and maintenance of the drive system.
  • A
    Andrew BurgessSep 4, 2025
    What to do if the engine does not stop on my Makita EM4341 Trimmer?
    • B
      Bruce JonesSep 4, 2025
      If your Makita Trimmer engine does not stop, check if the connector is detached and attach it securely. If the problem persists, the electric system may be abnormal, requiring professional inspection and maintenance.
  • C
    cheyennefrancoNov 9, 2025
    How to fix a Makita EM4341 when the engine does not start?
    • M
      michael77Nov 9, 2025
      If the Makita Trimmer engine doesn't start, several factors could be at play. First, ensure you're operating the primer pump correctly by pushing it 7 to 10 times. A low pulling speed of the starter rope can also be the culprit, so pull strongly. Check for a lack of fuel and replenish if needed. Other potential causes include a clogged fuel filter (clean it), a broken fuel tube (straighten it), or deteriorated fuel (replace it, ideally every month). Excessive fuel suction can also prevent starting; in this case, set the throttle lever from medium to high speed and pull the starter handle until the engine starts, paying close attention to the cutter blade. If it still won't start, remove the spark plug, dry the electrode, reassemble, and try starting again. Also, verify that the plug cap is...

Makita EM4341 Specifications

General IconGeneral
Engine Type4-stroke
Displacement43 cm³
Power Output1.5 kW
Weight8.6 kg
Fuel TypeUnleaded gasoline
Fuel Tank Capacity0.68 liters

Related product manuals