What to do if my Makita GB602 motor won't start and the fuses blow?
If your Makita Grinder motor won't start and the fuses or circuit breakers blow, there are a few potential reasons. Inspect the cord plug for damaged insulation and shorted wires. Also, inspect all connections on the motor for loose or shorted terminals or worn insulation. Ensure you install the correct fuses or circuit breakers.
How to fix a Makita GB602 when the motor will not start?
If your Makita Grinder motor won't start, the issue could stem from a couple of causes. First, check the power line to ensure it's providing the proper voltage. Second, inspect all lead connections on the motor to see if there are any loose or open connections.
What to do if my Makita GB602 Grinder motor won't start and fuses blow?
If your Makita Grinder motor won't start and the fuses or circuit breakers blow, it could be due to a short circuit in the inline cord or plug. Inspect the cord plug for damaged insulation and shorted wires. Another possible cause is a short circuit in the motor or loose connections; inspect all connections on the motor for loose or shorted terminals or worn insulation. Also, ensure that you install the correct fuses or circuit breakers.
Why does my Makita Grinder motor overheat?
If your Makita Grinder motor overheats, it's likely that the motor is overloaded. To resolve this, reduce the load on the motor.
How to prevent a wavy surface when using my Makita Grinder?
If your Makita Grinder produces a wavy condition on the surface of the workpiece, ensure the machine is securely mounted on a solid surface. Use a holding device to firmly retain the workpiece. Dress the grinding wheel. Consider using a softer wheel or reducing the feed rate.
Why does my Makita GB602 leave burning spots on the workpiece?
If you notice burning spots or cracks in the workpiece when using your Makita Grinder, consider the following: try a wheel which is softer style or coarser grit. Slow down the rate of movement of the workpiece into wheel. It might be necessary to add an optional coolant system or introduce coolant by hand.
Why does my Makita GB602 slow down during operation?
If the machine slows down when operating your Makita Grinder, the depth of cut may be too great. Slow down the rate of movement of the workpiece into the wheel.
Why does the wheel on my Makita Grinder dull quickly?
If the wheel dulls quickly and grit falls off your Makita Grinder, it could be due to several reasons. The depth of cut might be too great, so slow down the rate of movement of the workpiece into the wheel. The wheel might be too soft for the material being worked on, so select a harder bond. The wheel diameter may be too small, in which case you should replace the wheel. A bad wheel dress could also be the cause, so dress the wheel. Finally, there may be defective wheel bonding; consult the manufacturer of the grinding wheel.
What causes lines on the surface when grinding with a Makita GB602 Grinder?
If you notice lines on the surface of the workpiece when using your Makita Grinder, it could be due to an impurity on the wheel surface. Dress the grinding wheel to resolve this. Another cause could be the workpiece not being held tightly, so use a holding device to firmly retain the workpiece.
How to troubleshoot a Makita GB602 that won't start?
If your Makita Grinder motor will not start, it could be due to low voltage. Check the power line for proper voltage. It could also be caused by an open circuit in the motor or loose connections. Inspect all lead connections on the motor for loose or open connections.
Attach safety eye shields and mounting arms to wheel guards using provided hardware.
Adjust work rest for optimal gap between wheel and rest for safe grinding.
Guidelines for efficient, safe operation, tool sharpening, and material handling.
Instructions for attaching the saw blade sharpening kit to specific models.
Procedure for replacing the worklight bulb in the grinder.
How to use a wheel dressing tool to renew sharpness or true the wheel face.
To Next Page
General
