Need help?Do you have a question about the Makita GSR02 and is the answer not in the manual?
Details on model, blade diameter, cutting depth, speed, length, voltage, and weight.
Lists compatible battery cartridges and chargers for the tool.
Covers overall safety precautions and electrical safety guidelines for tool operation.
Ensures safe working environment, child safety, operator alertness, and proper PPE usage.
Guidelines for correct tool usage, maintenance, and safe battery handling.
Details requirements for tool service and battery maintenance.
Safe practices and techniques for performing various cutting operations.
Explains kickback phenomena and provides methods to avoid hazardous situations.
Covers safety for blind areas, hand placement, and avoiding forcing the tool.
Details on checking, operating, and maintaining the lower blade guard.
Crucial safety rules for battery usage, charging, and handling.
Recommendations for maximizing battery lifespan and performance.
Safety guidelines for the proper and safe use of the wireless unit.
Explains overload, overheat, and overdischarge protection mechanisms.
Describes how to check the remaining battery charge level.
Step-by-step instructions for inserting and removing the battery cartridge.
Procedures for setting and securing the desired cutting depth.
Instructions for performing cuts at various bevel angles.
Guidance on using the positive stopper for angle setting.
How to align the tool with cutting lines for accurate cuts.
Details on using the power switch, lock-off button, and trigger.
Information regarding the electric blade brake function.
Features like the soft start for improved usability.
Instructions on where to store the included offset wrench.
Step-by-step guide for removing and installing circular saw blades.
Procedures for cleaning blade guards during blade changes.
Instructions for attaching and securing the side handle.
Guide for attaching a vacuum cleaner for dust extraction.
Verifying the proper operation of the lower blade guard.
How to use the rip fence for accurate straight cuts and consistent width.
Overview of the wireless function and its requirements.
Steps for inserting the wireless unit into the tool.
Process for pairing the tool with a compatible vacuum cleaner.
How to activate and use the wireless connection between tool and vacuum.
Explanation of the indicator lamp meanings for wireless function.
Procedure to remove a registered tool from the vacuum cleaner.
Solutions for common problems encountered with the wireless activation.
Guide for fine-tuning the tool for precise 0-degree cuts.
To Next Page
General
