Need help?Do you have a question about the Makita HM0810T and is the answer not in the manual?
General| Cord length | 5 m |
|---|---|
| Input power | 900 W |
| Power source | AC |
| AC input voltage | 220 V |
| Impact rate | 2900 bpm |
| Sound power level | 103 dB |
| Impact energy (max) | 7.2 J |
| Sound pressure level | 92 dB |
| Uncertainty coefficient (concrete) | 1.5 m/s² |
Weight and Dimensions| Depth | 428 mm |
|---|---|
| Width | 96 mm |
| Height | 243 mm |
| Weight | 6000 g |
Explains various symbols used on the equipment and their meanings.
Symbol indicating the user should consult the instruction manual for proper use.
Symbol indicating the tool features double insulation for enhanced safety.
Details the specific applications and tasks the tool is designed for.
Information on connecting the tool to the correct power source.
Specifies the typical A-weighted noise levels emitted by the tool.
Safety advice to wear ear protection due to noise exposure.
Specifies the typical vibration total values emitted by the tool.
Statement of compliance with relevant European directives and standards.
Guidelines for maintaining a clean, well-lit, and safe working environment.
Precautions regarding power tool plugs, outlets, and avoiding wet conditions.
Advice for operator alertness, use of PPE, and preventing unintentional starts.
Instructions on proper tool usage, maintenance, and handling.
Emphasizes wearing ear protection to prevent hearing loss.
Importance of using the side grip for proper control and safety.
Safety measure to hold tool by insulated surfaces to avoid electric shock.
Mandates wearing safety helmet, glasses, and optional dust mask/gloves.
Ensures the bit is secured and the operator maintains firm footing.
Addresses vibration effects and the need for tool warm-up in cold weather.
Covers safe handling, avoiding pointing tool, and hot parts after use.
Caution regarding potential toxic chemicals in materials and dust inhalation.
Explains how to operate the tool's switch trigger for starting and continuous use.
Instructions on how to hold and operate the tool for demolition tasks.
Procedure for replacing worn carbon brushes to ensure continued operation.
Details on the tool's grease-packed lubrication system and service intervals.
List of recommended accessories for use with the Makita demolition hammer.
To Next Page
