Need help?Do you have a question about the Makita HM0871C and is the answer not in the manual?
General| Input power | 1100 W |
|---|---|
| Impact energy (max) | 8.1 J |
| Vibration level (chiseling) | 8 m/s² |
| Toolholder | 18 mm |
| Impact rate | 2650 bpm |
| Product color | Black, Blue |
Weight and Dimensions| Depth | 116 mm |
|---|---|
| Width | 466 mm |
| Height | 230 mm |
| Weight | 5600 g |
Overview of the demolition hammer and initial safety advisory.
Technical details, noise, and vibration levels for HM0871C/HM0870C.
Explanation of symbols, proper use, and power supply requirements.
Essential safety instructions for operating power tools.
Safe electrical practices and Makita's compliance statement.
Operator safety, tool handling, and maintenance advice.
Critical safety precautions for demolition hammer operation.
How to use the power switch and adjust the tool's speed.
Understanding status lights and basic assembly.
Attaching the auxiliary handle and installing/removing bits.
Performing demolition tasks and adjusting the bit angle.
Information on tool lubrication and authorized service center requirements.
Steps for disassembly and a list of recommended accessories.
To Next Page
