2
ENGLISH (Original instructions)
SPECIFICATIONS
Model HM0871C HM0870C
Blows per minute 1,100 - 2,650 min
-1
Overall length 466 mm 449 mm
Net weight 5.6 kg 5.1 kg
Safety class II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE045-1
Intended use
The tool is intended for chiselling work in concrete, brick,
stone and asphalt as well as for driving and compacting
with appropriate accessories.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model HM0871C
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 86 dB(A)
Sound power level (L
WA
) : 97 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG216-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
h,CHeq
) : 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG306-1
Work mode : chiseling function with side grip
Vibration emission (a
h,CHeq
) : 8.0 m/s
2
Uncertainty (K) : 2.0 m/s
2
For Model HM0870C
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 87 dB(A)
Sound power level (L
WA
) : 98 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG216-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
h,CHeq
) : 11.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG306-1
Work mode : chiseling function with side grip
Vibration emission (a
h,CHeq
) : 11.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
To Next Page
Loading...
