7 ENGLISH
OPERATION
Chipping/Scaling/Demolition
Always use the D-shaped side handle or side grip (aux-
iliary handle) and rmly hold the tool by both D-shaped
side handle or side grip and switch handle during oper-
ations. Turn the tool on and apply slight pressure on
the tool so that the tool will not bounce around, uncon-
trolled. Pressing very hard on the tool will not increase
the efciency.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
Lubrication
CAUTION:
• This servicing should be performed by Makita
Authorized Service Centers only.
This tool requires no hourly or daily lubrication because
it has a grease-packed lubrication system. It should be
relubricated regularly. Send the complete tool to Makita
Authorized or Factory Service Center for this lubrication
service.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specied
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Bull point (SDS-MAX)
• Cold chisel (SDS-MAX)
• Scaling chisel (SDS-MAX)
• Clay spade (SDS-MAX)
• Bit grease
• Safety goggles
• Hammer grease
• Plastic carrying case
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
To Next Page
Loading...
Need help?
General
