Need help?Do you have a question about the Makita HM1111C and is the answer not in the manual?
General| Input power | 1300 W |
|---|---|
| Impact energy (max) | 11.2 J |
| Vibration level (chiseling) | 7.5 m/s² |
| Toolholder | 18 mm |
| Impact rate | 2650 bpm |
| Product color | Black, Blue |
Weight and Dimensions| Depth | 126 mm |
|---|---|
| Width | 528 mm |
| Height | 247 mm |
| Weight | 8000 g |
Explanation of symbols used on the equipment for safe operation and understanding.
Details the tool's purpose for chiselling concrete, brick, stone, asphalt, and driving/compacting.
Information on connecting the tool to a single-phase AC supply of the correct voltage.
Presents typical A-weighted noise levels (LPA, LWA) for models HM1111C and HM1101C.
Details vibration total values (an,Cheq) for different work modes and models according to EN60745.
Guidelines for maintaining a clean, well-lit workspace and keeping bystanders away.
Precautions related to power cord, plugs, and protection against electric shock.
Advice on staying alert, using PPE, and avoiding hazards during operation.
How to operate the switch lever for starting, stopping, and locking the tool.
Using the adjusting dial to control blows per minute for variable speed operation.
Instructions for attaching and adjusting the D-shaped or stick type auxiliary side handle.
Explanation of the green power-ON and red service indicator lamps.
How to change the bit angle to 12 different positions using the change ring.
Guidance on holding the tool firmly and applying slight pressure for effective operation.
Information that the tool has a grease-packed system and requires professional relubrication.
List of recommended accessories for use with the tool, like chisels and safety gear.
To Next Page
