Makita HM1213C Technical Information

P 5/ 17
Repair
[3] ASSEMBLY/ DISASSEMBLY
[3]-1. Chuck (cont.)
ASSEMBLING
Take the disassembling step in reverse. Refer to Figs. 6, 5 and 3.
Note: It is difficult to set Tool holder cap in place by hand.
Put Tool holder cap on floor, and push Tool holder to Tool holder cap while making use of the machine weight.
(Fig. 7)
Fig. 7
Tool holder capTool holder
Remove Spring guide, Compression spring 35,
Change ring cover.
Chuck mechanism can be removed in this step.
Spring guide
Compression
spring 35
Change ring
cover
Fig. 6
Retaining ring
(EXT) WR-45
Change ring
Change ring
Change ring is fixed to Change ring cover with
Retaining ring (EXT) WR-45.
Remove Retaining ring with 1R003.
Change ring can be removed from Change ring cover.
Retaining ring
(EXT) WR-45
Change ring
cover
(3) The components of Chuck mechanism can be removed form Tool holder as illustrated in Fig. 6.

Makita HM1213C Specifications

General

Input power	1500 W
Impact energy (max)	18.6 J
Vibration level (chiseling)	7 m/s²
Toolholder	18 mm
Impact rate	1900 bpm
Product color	Black, Blue

Weight and Dimensions

Depth	149 mm
Width	576 mm
Height	265 mm
Weight	10800 g