To Next PageTo Next Page
Need help?Do you have a question about the Makita HP347D and is the answer not in the manual?
General| Type | Hammer Drill |
|---|---|
| Voltage | 18 V |
| Battery Type | Li-ion |
| Impacts per minute (Hi) | 0 - 21, 000 ipm |
| Impacts per minute (Lo) | 0 - 6, 000 ipm |
| Max. drilling diameter in steel | 13 mm |
| Max. drilling diameter in masonry | 13 mm |
| Chuck Size | 13 mm |
| Weight | 1.7 kg |
Details applicable battery cartridges and chargers for the tool models.
Explains symbols used on the equipment and their meanings.
Provides essential safety instructions for operating any power tool.
Outlines safety precautions related to the work environment and bystanders.
Details crucial safety measures concerning electrical hazards and tool usage.
Instructions for the safe and effective use and maintenance of battery-powered tools.
Specific safety advice for operating cordless hammer driver drills.
Explains how to change the direction of the tool's rotation using the switch lever.
Guides on choosing the correct mode for drilling, screwdriving, or hammer drilling.
Details how to adjust the torque setting for screwdriving applications.
Instructions for fitting and removing drill bits and driver bits from the chuck.
Steps and tips for performing screwdriving tasks with the tool.
How to use the optional blow-out bulb accessory to clear dust from holes.
General guidance on performing drilling tasks, including in wood and metal.
