Need help?Do you have a question about the Makita HR2020 and is the answer not in the manual?
General| Chuck type | - |
|---|---|
| Drilling diameter in wood (max) | 32 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in concrete (max) | 20 mm |
| Power source | AC |
Weight and Dimensions| Weight | 2300 g |
|---|
Identifies and describes all external parts and controls of the rotary hammer.
Explains manual symbols, intended use, and power supply requirements.
Critical safety precautions for all power tools to prevent injury.
Focuses on maintaining a safe and hazard-free environment during operation.
Guidelines for safe use of power cords, plugs, and protection against electrical hazards.
Emphasizes operator alertness, PPE, and proper work habits.
Instructions on using the correct tool, maintenance, and storage.
Specific safety warnings and recommendations for operating rotary hammers.
Details switch operation, reversing function, mode selection, and torque limiter.
Instructions for attaching the auxiliary side grip for safe operation.
Guidance on bit lubrication, fitting, and removing bits from the tool.
Instructions for hammer drilling, using depth gauge, dust cup, blow-out bulb, and drilling wood/metal.
Information on general tool maintenance and service center importance.
Lists recommended accessories for the rotary hammer and advice on their use.
To Next Page
