Need help?Do you have a question about the Makita HR2440 and is the answer not in the manual?
General| Chuck type | - |
|---|---|
| Impact energy (max) | 2.6 J |
| Drilling diameter in concrete (max) | 24 mm |
| Power source | AC |
Symbol indicating the need to read the instruction manual before use.
Indicates double insulation for electrical safety.
Guidelines for maintaining a safe and organized work environment.
Precautions related to electrical power sources and connections.
Advisories for user alertness, protective equipment, and proper tool handling.
Instructions for proper operation, maintenance, and tool longevity.
Guidance on tool maintenance and repair by qualified personnel.
Recommendation to use hearing protection due to noise exposure.
Importance of using auxiliary handles for better control and safety.
Advice on maintaining grip to avoid electric shock from live wires.
Mandatory safety gear including head protection, eye protection, dust mask, and gloves.
Ensuring the bit is secured and checking screw tightness for safety.
Procedure to warm up the tool before use in cold or after prolonged storage.
Maintaining stable footing and checking the area below for safety.
Holding the tool firmly, keeping hands away from moving parts, not leaving it running.
Do not point tool at others; caution about hot parts after use.
Awareness of potentially toxic chemicals in materials and handling precautions.
Explanation of how to operate the switch trigger and lock button.
How to activate the lamp on models equipped with this feature.
How to change the direction of rotation using the reversing switch lever.
Guidance on choosing between rotation-only and hammer-drilling modes.
Explanation of the torque limiter function and its operation.
Instructions for attaching and positioning the auxiliary side grip.
Guidance on applying bit grease for smooth operation and service life.
Step-by-step instructions for fitting and removing bits from the chuck.
Instructions for using the dust cup accessory during drilling operations.
Detailed procedure for performing hammer drilling effectively and safely.
Using the blow-out bulb to clear dust from drilled holes.
Instructions for drilling holes in wood and metal using appropriate accessories.
To Next Page
