To Next PageTo Next Page
Need help?Do you have a question about the Makita HR2470T and is the answer not in the manual?
General| Power Input | 780 W |
|---|---|
| Impact Energy | 2.4 J |
| No Load Speed | 0 - 1100 rpm |
| Blows per Minute | 0 - 4500 bpm |
| Max Drilling Capacity in Concrete | 24 mm |
| Max Drilling Capacity in Steel | 13 mm |
| Max Drilling Capacity in Wood | 32 mm |
| Dimensions | 370 x 84 x 214 mm |
| Chuck Type | SDS-Plus |
| Type | Rotary Hammer |
| Power Source | Corded Electric |
| Voltage | 230 V |
| Length | 370 mm |
| Vibration Control | No |
| Anti-Vibration Technology | No |
Guidance on maintaining a safe and clear work environment.
Precautions related to the tool's electrical components and power source.
Measures for protecting the operator's physical well-being during operation.
Key safety advice for operating the rotary hammer, including protective gear and handling.
Steps for performing hammer drilling, including pressure and chip management.
Instructions for using the tool in chipping, scaling, or demolition modes.
