Need help?Do you have a question about the Makita HR2451 and is the answer not in the manual?
General| Power Source | Corded |
|---|---|
| Impact Energy | 2.7 J |
| Chuck Type | SDS-Plus |
| Power Input/Consumption | 780 W |
| Max. Drilling Diameter in Concrete | 24 mm |
| Max. Drilling Diameter in Steel | 13 mm |
| Max. Drilling Diameter in Wood | 30 mm |
| No Load Speed | 1100 rpm |
Details capacities, speed, dimensions, and weight for different models.
Explains the meaning of symbols used on the tool for proper operation.
Defines the tool's purpose and requirements for safe electrical connection.
Provides noise and vibration levels for European users and safety recommendations.
Lists compliance with relevant European safety and EMC directives.
Guidelines for keeping the work area clean and safe, and child safety.
Instructions on using the right tool, proper dress, and safety gear.
Advice on tool maintenance, cord care, and securing workpieces.
Tips on staying alert, checking parts, and avoiding unintentional starts.
Rules for handling tools in various conditions and ensuring secure footing.
Guidance on bit security, vibration effects, and safe operating practices.
How to operate the switch trigger and lock button for starting and continuous use.
Instructions for using the built-in lamp for illumination.
How to change the rotation direction and important cautions for its use.
Procedure for removing and attaching the SDS-plus quick change chuck.
Procedure for attaching the quick change drill chuck.
How to select between 'Rotation with hammering' and 'Rotation only' modes.
Instructions for using the 'Hammering only' mode for demolition tasks.
How the torque limiter works and precautions to take when it actuates.
How to properly install and adjust the auxiliary side grip for safety.
Guidance on applying bit grease for smooth chuck action and longevity.
Step-by-step guide for inserting and removing drill bits securely.
How to adjust the bit angle for chipping, scaling, or demolition operations.
How to use the depth gauge for drilling holes of uniform depth.
Instructions for attaching the dust cup to prevent dust during drilling.
Steps for performing hammer drilling, including pressure and hole clearing.
Using the optional blow-out bulb to clean dust from holes.
How to operate the tool for chipping, scaling, and demolition tasks.
Using the drill chuck for drilling wood and metal, with operational cautions.
Important warnings about using the chuck, excessive pressure, and stuck bits.
Specific instructions for diamond core drilling operations.
Guidance on tool inspection, maintenance, and authorized repairs.
List of recommended accessories for use with the tool.
To Next Page
