To Next PageTo Next Page
Need help?Do you have a question about the Makita HR2470FT and is the answer not in the manual?
General| Input power | 780 W |
|---|---|
| Power source | AC |
| Impact rate | 4500 bpm |
| Rated speed (max) | 1100 RPM |
| Impact energy (max) | 2.7 J |
| Drilling diameter in wood (max) | 32 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in concrete (max) | 24 mm |
| Weight (including battery) | 2600 g |
| Carrying case | Yes |
Technical specifications for HR2470/HR2470F and HR2470T/HR2470FT models, including capacities and weight.
Details on the intended applications for the rotary hammer, such as drilling and chiselling in various materials.
Information on connecting the tool to a suitable power supply, emphasizing voltage and single-phase AC.
Essential safety warnings and instructions for all power tool users, covering shock, fire, and injury prevention.
Key safety precautions for rotary hammer operation, including hearing protection, handling, and warm-up procedures.
How to start, stop, and operate the switch trigger for continuous use and for locking the tool.
Instructions for turning on the tool's LED lamp, with a caution not to look directly at the light source.
How to change the direction of rotation using the reversing switch lever after the tool has stopped.
Procedures for removing the SDS-plus chuck and attaching the quick change drill chuck for specific models.
Guide to selecting the correct mode (hammer drilling, rotation only, hammering only) for different tasks.
Explanation of the torque limiter's function and the importance of switching off the tool immediately when it actuates.
Instructions for installing and positioning the auxiliary side grip for safe operation.
Guidance on applying bit grease to the shank head for smooth action and longer service life.
Steps for inserting and securing a bit, and how to remove it by pulling the chuck cover down.
How to adjust the bit angle for chipping, scaling, or demolishing operations.
Instructions for using the depth gauge for drilling uniform depth holes, including adjustment and limitations.
Guidance on using the dust cup for overhead drilling to prevent dust from falling.
Detailed steps for hammer drilling, including bit placement, trigger use, pressure, and cleaning clogged holes.
How to use the optional blow-out bulb accessory to clean dust from drilled holes.
Instructions for performing chipping, scaling, and demolition tasks using the appropriate mode and technique.
Steps for drilling in wood or metal using the appropriate chuck and mode, with cautions.
Guidance for diamond core drilling operations, emphasizing the 'rotation only' mode to prevent bit damage.
General maintenance guidelines, including safety precautions and recommending authorized service centers for repairs.
List of recommended accessories for use with the tool, with a caution against using unapproved items.
Information on typical noise and vibration emission values according to EN60745 standards.
Reference to the EC declaration of conformity included as Annex A for European countries.
