To Next PageTo Next Page
Need help?Do you have a question about the Makita HR2410 and is the answer not in the manual?
General| Power Source | Corded |
|---|---|
| Voltage | 230 V |
| No Load Speed | 0 - 1100 rpm |
| Blows per Minute/Impact Rate | 0 - 4500 bpm |
| Chuck Type | SDS-Plus |
| Weight | 2.6 kg |
| Power Input | 780 W |
| Max. Drilling Diameter in Concrete | 24 mm |
| Max. Drilling Diameter in Steel | 13 mm |
| Max. Drilling Diameter in Wood | 30 mm |
| Vibration Level | 12.5 m/s² |
| Type | Rotary Hammer |
| Impact Energy | 2.7 J |
Symbol indicating the need to read the instruction manual for proper understanding and operation.
Symbol indicating the tool features double insulation for enhanced safety and protection against electric shock.
Diagram illustrating the tool's components with numbered labels for identification.
Technical details and capabilities of the tool model, including capacities, speed, and weight.
Defines recommended applications and details the correct power source requirements for safe operation.
General safety recommendations to be followed before and during the use of the tool.
Instructions on how to loosen, adjust, and tighten the auxiliary side grip for optimal handling.
Step-by-step guide on safely inserting and removing drill bits from the chuck.
Guidance on using the depth gauge to set and maintain a consistent drilling depth.
Instructions for operating the switch trigger and reversing lever for control and direction.
How to choose between rotation-only and hammer-drilling modes using the mode selector knob.
Details on the torque limiter's operation and precautions for its activation.
Procedures and safety advice for performing hammer drilling, including breakthrough and clogging precautions.
Guidance on applying bit grease and using the blow-out bulb for optimal performance and hole cleaning.
Instructions for dust cup attachment and specific advice for drilling in wood or metal materials.
Safety advice regarding unplugging the tool before any maintenance or repair work.
