Need help?Do you have a question about the Makita HR2432 and is the answer not in the manual?
General| Voltage | 240 V |
|---|---|
| Chuck Type | SDS-Plus |
| Weight | 2.7 kg |
| Max. Drilling Diameter in Concrete | 24 mm |
| Max. Drilling Diameter in Steel | 13 mm |
| Max. Drilling Diameter in Wood | 30 mm |
| Power Input/Consumption | 780 W |
| Power Source | Electric |
Covers safety precautions for maintaining a clean, well-lit work environment and avoiding hazardous atmospheres.
Outlines crucial electrical safety measures, including plug usage, cord care, and RCD protection.
Details essential personal protective measures, alertness, and preventing unintentional starting.
Emphasizes the need for ear protectors to prevent hearing loss from noise exposure.
Recommends safety helmet, glasses, face shield, dust mask, and padded gloves.
Explains how to operate the switch trigger and lock button for starting and continuous operation.
Guides on selecting modes: Rotation with hammering, Rotation only, and Hammering only.
Step-by-step guide on how to insert and secure or remove a bit from the tool.
Technique for hammer drilling, emphasizing light pressure and handling sudden twisting forces.
To Next Page
