Need help?Do you have a question about the Makita HR2450 and is the answer not in the manual?
General| Power Input | 780 W |
|---|---|
| Impact Energy | 2.7 J |
| No Load Speed | 0 - 1, 100 rpm |
| Blows per Minute | 0 - 4, 500 bpm |
| Drilling Capacity in Concrete | 24 mm |
| Drilling Capacity in Steel | 13 mm |
| Drilling Capacity in Wood | 32 mm |
| Chuck Type | SDS-Plus |
Details drilling capacities for concrete, steel, wood, and performance metrics like speed and blows per minute.
Provides physical dimensions, net weight, and safety class of the tool.
Covers tool symbols, intended use, power requirements, noise/vibration, and conformity declarations.
Guidelines for maintaining a clean work area, safe environment, and proper tool usage.
Recommendations for appropriate clothing, safety glasses, hearing protection, and dust masks.
Instructions for safe tool handling, cord management, securing work, and regular maintenance.
Crucial pre-operation checks, including disconnection, key removal, and inspection of parts.
Warnings about accessory use and the importance of qualified repair services.
Specific handling rules, including grip precautions, ear protection, and firm footing.
Safety measures during operation, such as keeping hands clear and avoiding pointing at people.
Instructions for warming up the tool in cold conditions and checking screw tightness.
Details on how to operate the switch trigger and lock button for starting and continuous operation.
Instructions for using the lamp feature on specific models and care for the lens.
Explanation of how to change the direction of rotation using the reversing switch lever.
Steps for removing and attaching SDS-plus and drill quick change chucks.
How to select 'Rotation with hammering' and 'Rotation only' modes for different tasks.
How to select and use the 'Hammering only' mode for demolition tasks.
Details on the torque limiter's function and when it actuates.
Instructions for correctly installing and securing the auxiliary side grip.
Guidance on applying bit grease for smooth operation and longer service life.
Procedure for installing and removing bits, including cleaning and greasing the shank.
How to adjust the bit angle for chipping, scaling, or demolition operations.
Instructions for using the depth gauge to drill holes of uniform depth.
How to attach and use the dust cup to prevent dust during drilling.
Detailed steps and safety precautions for performing hammer drilling operations effectively.
How to use the blow-out bulb to clean debris from drilled holes.
Guidance on performing chipping, scaling, and demolition tasks safely and efficiently.
Using the optional drill chuck assembly or quick change drill chuck for specific models.
Advice on drilling, handling stuck bits, and securing workpieces during operation.
Specific instructions for performing diamond core drilling operations.
Guidelines for proper tool maintenance, inspection, and authorized repair services.
List of recommended accessories and attachments for the tool.
To Next Page
