Need help?Do you have a question about the Makita HR2400 and is the answer not in the manual?
General| Power Input | 680 W |
|---|---|
| No Load Speed | 0 - 1100 rpm |
| Drilling Capacity (Concrete) | 24 mm |
| Drilling Capacity (Steel) | 13 mm |
| Drilling Capacity (Wood) | 32 mm |
| Chuck Type | SDS-Plus |
| Power Consumption | 680 W |
| Weight | 2.6 kg |
Guidelines for safe use of electrical power, including polarized plugs and grounded circuits.
Step-by-step guide for securely inserting and removing bits from the tool's chuck.
Steps for effective hammer drilling, including pressure, clogged holes, and safety precautions.
To Next Page
