Makita HR2600 User Manual

Model No.
Description
CONCEPT AND MAIN APPLICATIONS
Specification
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
361 (14-1/4)
77 (3)
209 (8-1/4)
HR2600/ HR2601
Rotary Hammers 26mm (1")
Chuck type
Impacts per minute= minֿ¹
No load speed: minֿ¹= rpm
Specification
Double insulation
Weight according to
EPTA-Procedure 01/2003*2: kg (lbs)
Power supply cord: m (ft)
Variable speed control
Rotation reversing facility
Operation mode
Vibration absorption
Model
*1 AVT (Anti Vibration Technology); Counterweight mechanism + Damper spring
*2 with side grip
Concrete
TCT bit
Steel
Wood
Core bit
Diamond core bit
Capacities:
mm (")
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Max. Output (W)
110
120
220
230
240
7.7
7
3.8
3.7
3.5
50/ 60
50/ 60
50/ 60
50/ 60
50/ 60
800
---
800
800
800
400
400
400
400
400
550
550
550
550
550
127 6.6 50/ 60 800 400 550
Current (A)
Torque limiter
HR2600/ HR2601
Yes (by trigger)
Yes
Europe, North America: 4.0 (13.1), Australia, Brazil: 2.0 (6.6),
Other countries: 2.5 (8.2)
Yes
0 - 1,200
0 - 4,600
Adapted for SDS-PLUS shank bits
26 (1)
68 (2-11/16)
2.8/ 2.9
(6.2/ 6.3)
2 modes
(Rotation only/ Rotation with Hammering)
No/ Yes (AVT*1)
80 (3-1/8)
13 (1/2)
32 (1-1/4)
Yes
NoLED Job light
*Round shank bits can also be used by
replacing the factory-mounted chuck with
Quick change drill chuck (keyless).
PRODUCT
P 1/ 13
Model Operation Mode LED Chuck type
2 modes
(Rotation only/
Rotation with hammering)
3 modes
(Rotation only/
Rotation with hammering/
Hammering only)
No
No
26mm
Capacity
23mm
23mm
26mm
No
No
Adapted for
SDS-PLUS shank bits
Adapted for
SDS-PLUS shank bits
and Round shank bits*
Yes
No
AV T
No
No
No
Yes
Yes
NoNo
Yes
Yes
No
HR2300
HR2310T
HR2610T
HR2611FT
HR2600
HR2601
HR2611F
HR2610
H
W
L
T
ECHNICAL INFORMATION
HR2600/ HR2601 are 26mm (1") 2-mode rotary hammers adapted for
SDS-PLUS bits, featuring compact and lightweight design, enhanced comfort
and better control with ergonomic handle. Model HR2601 is equipped with AVT;
Anti Vibration Technology consisting of Active dynamic vibration absorber
with counterweight and Damper spring. AVT ensures operation with
extremely low vibration, which is much superior to the competitors.
HR2600 series models are available in the variations listed below, including
HR2300 and HR2610 series models developed on the same concept.
For information of HR2300 and HR2610 series models,
see “
TECHNICAL INFORMATION” of each series.

Makita HR2600 Specifications

General

Rated speed (max)	1200 RPM
Impact energy (max)	2.4 J
Drilling diameter in wood (max)	32 mm
Drilling diameter in steel (max)	13 mm
Power source	AC

Summary

Technical Information

Concept and Main Applications

Overview of HR2600/HR2601 rotary hammers, their features, and applications.

Specifications

Technical details on electrical, mechanical, and capacity specifications for the models.

Repair Procedures

Necessary Repairing Tools

List of specific tools required for machine repairs.

Lubrication Guidance

Instructions for applying grease and lubricants to protect parts.

Bit Holder Section Disassembly

Detailed steps for disassembling and assembling the bit holder.

Change Lever Section Disassembly

Instructions for disassembling and assembling the change lever.

Armature Replacement

Procedure for replacing the armature assembly.

Torque Limiter Section Replacement

Steps for replacing the torque limiter components.

Impact Bolt in Tool Holder Disassembly

Instructions for disassembling the impact bolt within the tool holder.

Swash Bearing Section Disassembly

Steps for disassembling and assembling the swash bearing section.

Piston Cylinder to Swash Bearing Assembly

Guide for assembling the piston cylinder to the swash bearing.

Gear Housing to Inner Housing Assembly

Procedure for assembling the gear housing to the inner housing.

Maintenance Program

Recommended Parts Replacement

Parts recommended for replacement along with carbon brushes.

Diagrams

Circuit Diagram

Diagram showing brush holder unit and noise suppressor connections.

Wiring Diagram

Visual guide for internal wiring connections of the tool.