To Next PageTo Next Page
Need help?Do you have a question about the Makita HR3850 and is the answer not in the manual?
General| Voltage | 120V |
|---|---|
| No Load Speed | 0 - 1, 100 RPM |
| Chuck Type | SDS-Plus |
| Bit Type | SDS-Plus |
| Power Source | Corded Electric |
Explains symbols used for the tool to ensure proper understanding before use.
Identifies and labels key components of the tool with numbered illustrations.
Details technical capacities, dimensions, and weight for HR3520 and HR3850 models.
Refers to enclosed safety instructions for user safety and general awareness.
Provides essential safety precautions for operating the tool, including protective gear and handling.
Explains how to attach and position the auxiliary side grip for optimal control and safety.
Details the procedure for securely installing and removing drill bits and other accessories.
Describes how to switch between rotation with hammering and hammering-only modes.
Explains how to adjust the depth gauge for precise drilling depth.
Provides instructions on how to start and stop the tool using the trigger.
Guides users on performing hammer drilling effectively and safely, including pressure and hole cleaning.
Outlines the correct procedure for using the tool for chipping, scaling, or demolition tasks.
Details the installation and operation of optional core bits, including with and without a center bit.
Explains the procedure for replacing worn carbon brushes to maintain tool functionality.
Details the process for lubricating the tool, including grease type and quantity, during maintenance.
Formal declaration of the product's compliance with relevant EU directives and standards.
Specifies the A-weighted noise levels and vibration values for the HR3520 model.
Specifies the A-weighted noise levels and vibration values for the HR3850 model.
