To Next PageTo Next Page
Need help?Do you have a question about the Makita HS7100 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Blade Diameter | 7-1/4 inches |
| Arbor | 5/8 inches |
| Max Cutting Depth at 90 Degrees | 2-5/8 inches |
| Max Cutting Depth at 45 Degrees | 1-7/8 in |
| Amperage | 15 amps |
Details on the A-weighted noise levels for different models.
Describes vibration total values for various work modes and models.
Essential safety precautions for all power tools.
Precautions for safe cutting procedures and kickback prevention.
Instructions for checking and operating the lower blade guard.
Extra safety advice for specific cutting situations and material handling.
Details on depth adjustment, bevel cuts, sighting, and switch action.
Procedure for safely changing the saw blade.
Information about the tool's integrated lamp.
Guidance on proper handling and sawing techniques.
Using the rip fence for accurate straight cuts.
Calibrating the saw for precise 0° and 45° cuts.
Ensuring the base is parallel to the blade.
