Need help?Do you have a question about the Makita LS1013FL and is the answer not in the manual?
General| Laser Guide | Yes |
|---|---|
| Voltage | 120V |
| Type | Compound Miter Saw |
| Blade Diameter | 260 mm |
| Miter Angle Range | 0 - 52 degrees |
| Bevel Angle Range | 0 - 45 degrees |
| Max. Cutting Capacity at 90° | 12 inches |
| Max. Cutting Capacity at 45° | 8 inches |
| Weight / Net Weight | 16.5 kg (36.4 lbs) |
| Max Cutting Depth at 90° | 90 mm (3-9/16") |
| Max Cutting Depth at 45° | 65 mm (2-9/16") |
Identifies the Slide Compound Saw and its model numbers.
Lists model, dimensions, capacities, speed, weight, and safety class.
Explains symbols (e.g., Double Insulation) and the tool's purpose.
Details power source requirements for the tool.
Provides typical A-weighted noise levels (LPA, LWA) and uncertainty.
Details vibration emission values (an) and uncertainty.
Basic precautions for reducing risk of fire, electric shock, and injury.
Essential rules for safe and effective use of the tool.
Rules for eye/hearing protection, work area, children, and tool storage.
Guidelines on tool usage, workpiece securing, and maintenance.
Emphasizes wearing safety glasses, hearing protection, and dust masks.
Instructions for securely mounting the tool to a stable surface.
Explains how the blade guard moves and its importance.
Steps to adjust kerf boards for optimal cutting.
Explains how to adjust for maximum cutting capacity with a 255mm blade.
Detailed steps for setting the miter angle accurately.
Instructions for setting the bevel angle precisely.
How to adjust the stopper arm for blade lower limit.
Explains switch trigger, lock-off button, and safe usage.
Instructions for turning on and using the tool's lights.
How to use and align the laser line for cutting.
Location and use of the included socket wrench.
Steps for installing a new saw blade, including flange selection.
Instructions for safely removing the saw blade.
Details on using different rings for blade hole diameters by region.
Instructions for attaching, using, and emptying dust bag and dust box.
Emphasizes proper securing for safety and preventing damage.
How to position and use the sub-fence for different cuts.
Installation and use of vertical and horizontal vises.
How to install and adjust workpiece holders.
Essential checks before starting the tool.
Advice on applying pressure for smooth cuts and motor efficiency.
How to perform press cuts on small workpieces.
How to perform slide cuts on wide workpieces.
References to angle adjustment for miter and bevel cuts.
How to perform cuts with both miter and bevel angles simultaneously.
Guidelines for safely cutting aluminum extrusions.
How to perform groove or dado cuts.
Instructions for safely carrying the saw.
General advice on tool inspection and maintenance.
Steps to adjust the miter angle precisely.
Steps to set the blade to a 0° bevel angle.
Steps to set the blade to a 45° bevel angle.
How to ensure smooth action during bevel adjustments.
How to adjust the laser line's position relative to the blade.
How to clean the laser light lens for visibility.
Instructions for replacing the fluorescent tube.
How to check and replace carbon brushes.
How to clean and lubricate the tool after use.
Lists recommended accessories for the tool.
To Next Page
