Need help?Do you have a question about the Makita LS1011 and is the answer not in the manual?
General| No Load Speed | 4, 600 RPM |
|---|---|
| Amperage | 13 A |
| Voltage | 120 V |
| Blade Diameter | 10 inches |
| Arbor Size | 5/8 inches |
| Maximum cutting depth at 90° | 3-5/8 inches |
Essential safety steps: read manual, use guards, clean area, avoid hazards, keep children away.
Safety measures: wear PPE, secure workpiece, maintain tool, disconnect power, use correct accessories.
Guide to installing/removing blade, using safety cover, and operating the switch.
Method for cutting small workpieces with simple pressure.
Technique for cutting wide workpieces using a sliding carriage.
Performing cuts at a bevel angle, with safety precautions.
Performing cuts with combined miter and bevel angles.
How to adjust miter and bevel angles for accurate cuts.
To Next Page
