To Next PageTo Next Page
Need help?Do you have a question about the Makita LS1011N and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Type | Miter Saw |
| Blade Diameter | 255 mm |
| Maximum cutting depth at 90° | 91 mm |
| Maximum cutting depth at 45° | 63 mm |
| Max Cutting Capacity (Vertical) | 91 mm |
| Max Cutting Capacity (Horizontal) | 305 mm |
| Power Input | 1600 W |
| Weight | 17.5 kg (38.6 lbs) |
| Net Weight | 13.5 kg |
| Frequency | 50 Hz |
List of items included with the tool for standard operation.
List of additional accessories available for purchase.
Instructions for applying grease to specific parts of the tool for maintenance.
Steps for removing the slide pipe and related components from the saw.
Steps for reassembling the slide pipe and its associated parts.
Checking the smooth operation of the slide pipe after assembly.
Procedure for assembling the linear ball bearing 3064 to the turn base.
Procedure for assembling the felt ring and cap onto the turn base.
Procedure for assembling the front cover to the turn base.
Steps for safely disassembling the motor section from the saw arm.
Detailed steps for removing the motor section using an arbor press.
Steps for reassembling the motor section to the base section.
Assembling the link plate to the arm using socket head bolts.
Adjusting the saw blade to achieve 0° bevel and miter angles.
Adjusting the saw blade to achieve a 45° bevel angle.
Connecting the field lead wires to the switch for proper operation.
Routing the power supply cord through the handle with strain relief.
