Need help?Do you have a question about the Makita LS1019L and is the answer not in the manual?
General| Laser Guide | Yes |
|---|---|
| Power Source | Corded |
| Amperage | 15 A |
| No Load Speed | 3, 200 RPM |
| Voltage | 120V |
| Blade Diameter | 10 inches |
| Bevel Capacity | 0° - 48° |
| Miter Range | 0° - 60° |
| Arbor Size | 5/8 inches |
| Max. Cutting Capacity (45° Miter) | 8-1/2 inches |
| Max Cutting Depth at 90° | 3-5/8 inches |
| Max Cutting Depth at 90° (Left) | 3-5/8 inches |
| Power Input | 15 A |
Details cutting dimensions for miter, bevel, and special cuts.
Explains equipment symbols and defines the tool's primary applications.
Covers universal safety advice for power tools, including work area, electrical, and personal safety.
Emphasizes clamping, stability, hand placement, and avoiding blade contact.
Covers proper cutting motion, avoiding kickback, and safe tool operation.
Focuses on safe practices like workshop security, unattended tools, and guard usage.
Guides on checking blades for damage, cleaning, and using correct flanges.
Instructions for attaching the grip and connecting the dust extraction hose.
Explains the operation, importance, and safety of the blade guard system.
Guides on checking and adjusting blade limits for maximum cutting performance.
Provides steps for setting the miter and bevel angles, including positive stops.
Explains the slide lock mechanism and safe switch trigger operation.
Guides on adjusting the laser line for precise cutting reference.
Step-by-step instructions for safely replacing the saw blade.
Details connecting vacuum cleaners and dust bags for clean operation.
Emphasizes proper methods for securing workpieces to prevent movement and injury.
Instructions for installing and using vertical and horizontal vises for workpiece clamping.
Explains procedures for standard press cuts and wide workpiece slide cuts.
Covers compound cutting and specific methods for crown and cove moldings.
Provides tables and examples for setting angles for crown and cove molding cuts.
Details the use and installation of optional crown molding stoppers.
Covers procedures for groove cutting and cutting aluminum extrusions.
Outlines safety checks and procedures for transporting the miter saw.
Provides guidance on recalibrating miter and bevel angles if alignment is off.
Specific steps to set the 45° bevel angle accurately.
Guides on adjusting the laser line for precise cutting reference.
Instructions for cleaning the laser lens to ensure visibility.
Step-by-step guide for replacing worn carbon brushes.
Lists recommended optional accessories and advises on their use.
To Next Page
