Need help?Do you have a question about the Makita LS1219L and is the answer not in the manual?
General| Input power | 1800 W |
|---|---|
| Cable length | 2.5 m |
| Power source | AC |
| Vibration level | 2.5 m/s² |
| Idle speed (max) | 3200 RPM |
| Sound power level | 100 dB |
| Miter setting (left) | 60 ° |
| Sound pressure level | 91 dB |
| Bevel setting (right) | 48 ° |
| Sound level uncertainty | 3 dB |
| Vibration level uncertainty | 1.5 m/s² |
| Bevel cut capacity (0° x 45°) | 54 x 363 mm |
| Blade bore | 30 mm |
| Blade diameter | 305 mm |
| Saw blade included | Yes |
| Package type | Box |
| Product type | Sliding compound-miter saw |
| Cutting capacity 0° | 382 mm |
| Bevel type | Single bevel |
Weight and Dimensions| Depth | 898 mm |
|---|---|
| Width | 644 mm |
| Height | 725 mm |
| Weight | 29500 g |
Details cutting dimensions for wood based on miter and bevel angles.
Specific cutting dimensions for crown molding and base boards.
Illustrations and explanations of safety and operational symbols.
Tool purpose, power connection, and safety requirements.
Emission data and European compliance statement.
Essential safety precautions applicable to all power tools.
Guidelines for safe workspace and operator protection.
Precautions for safe use of electrical power and cords.
Guidelines for proper operation, maintenance, and care of the tool.
Specific safety guidelines for operating mitre saws.
Further safety advice and operational considerations.
Identification and labeling of the tool's components.
Steps for installing components like the grip and dust extraction hose.
Steps for securely mounting the tool onto a workbench.
Description of the blade guard operation and kerf boards.
Procedure to adjust for maximum cutting capacity.
Details on adjusting miter/bevel angles and slide lock operation.
Details on the trigger and lock-off button functions.
Explanation of constant speed control and soft start features.
Using the laser line guide for accurate cutting.
General steps for assembly, hex wrench storage.
Instructions for safely removing and installing the saw blade.
Instructions for attaching a vacuum cleaner for dust collection.
Using the dust bag and securing guide fences.
Critical instructions for safely securing workpieces during cuts.
Installation and use of vertical and horizontal vises.
Procedures for performing straight and wide workpiece cuts.
Instructions for various angle cutting techniques.
Techniques for cutting moldings and base boards.
Guidance on measuring workpieces and performing test cuts.
Use of crown molding stoppers and wood facing.
Instructions for cutting aluminum, grooves, and max width.
Technique to achieve maximum cutting width.
Safe carrying procedures and basic maintenance reminders.
Procedure for realigning cutting angles if misaligned.
Detailed steps for adjusting the bevel angle.
How to adjust laser line and clean its lens.
Procedure to align sub fences with guide fences.
Steps for checking and replacing worn carbon brushes.
List of recommended accessories for the tool.
Routine cleaning, lubrication, and maintenance after operation.
To Next Page
