Need help?Do you have a question about the Makita LS1219 and is the answer not in the manual?
General| Blade Diameter | 12 inches |
|---|---|
| Arbor Size | 1 inch |
| No Load Speed | 3, 200 RPM |
| Amperage | 15 Amps |
| Power Source | Corded Electric |
| Miter Range | 0° - 60° (left and right) |
| Cutting Capacity (45° Miter) | 3-5/8" x 10-1/2" |
| Weight | 65 lbs |
| Max Cutting Depth at 90° | 3-5/8 inches |
| Motor Power | 15 amps |
| Cutting Capacity (90°) | 3-5/8" x 15" |
Table detailing the maximum dimensions of wood that can be cut at various angles.
Details on capacities for specific cuts like crown molding and base boards.
Describes the primary applications and materials the tool is designed for.
Information on voltage, single-phase AC, and double insulation features.
Measured sound pressure and power levels according to safety standards.
Declared vibration total values measured according to safety standards.
Statement confirming compliance with European directives.
Essential safety advice applicable to all power tools.
Guidelines for maintaining a safe and organized workspace.
Precautions related to power supply, cords, and avoiding electric shock.
Advice on protective gear, alertness, and preventing common accidents.
Guidance on where and how to get the power tool serviced.
Specific safety precautions for using mitre saws.
Further guidelines for safe and effective operation.
Steps for attaching the tool's grip handle.
Guide for connecting the dust collection system.
Procedures for securely attaching the tool to a workbench.
Details on the function and importance of the blade guard.
Information on kerf boards for minimizing workpiece tear-out.
How to ensure the tool provides its maximum cutting performance.
Function and adjustment of the stopper arm for blade depth.
Procedure for setting the horizontal cutting angle.
Procedure for setting the vertical cutting angle.
Explanation of how to lock the carriage for specific cuts.
How to safely operate the power switch and lock-off button.
Description of electronic controls like constant speed and soft start.
Steps for aligning the laser cutting guide with the blade.
Guidance on storing the included hex wrench to prevent loss.
Procedures for safely removing and installing the saw blade.
How to attach a vacuum cleaner for dust extraction.
Instructions for attaching and emptying the dust collection bag.
Importance and methods for securely clamping materials during cuts.
Information on using and adjusting the guide fences for support.
Instructions for installing and using the vertical vise accessory.
Instructions for installing and using the horizontal vise accessory.
Details on extending and using the sub bases for workpiece support.
How to perform a straight cut by pressing the blade down.
Method for cutting wider materials using the sliding carriage.
Instructions for making angled cuts with the blade tilted.
Instructions for making angled cuts with the turn base.
Performing cuts that combine bevel and miter angles simultaneously.
Specific techniques for cutting base boards.
Techniques for cutting decorative moldings.
How to measure and set workpiece dimensions for accurate cuts.
Specific guidance for performing left-side bevel cuts.
Specific guidance for performing right-side bevel cuts.
How to use stoppers for easier crown molding cuts.
Procedures for cutting aluminum profiles with the saw.
Information on attaching wood facings to the guide fence for better cuts.
How to safely perform groove cuts, avoiding dado blades.
Method to achieve maximum cutting width by using a platform.
How to ensure the miter and bevel angles are set correctly.
Detailed steps for setting the bevel angle precisely.
Procedures for aligning and cleaning the laser guide.
Steps for replacing worn carbon brushes for motor maintenance.
Routine cleaning and lubrication after operating the tool.
To Next Page
