Need help?Do you have a question about the Makita LS1220 and is the answer not in the manual?
General| Type | Compound Miter Saw |
|---|---|
| Blade Diameter | 12 inches |
| Arbor Size | 1 inch |
| Motor Power | 15 Amp |
| Voltage | 120V |
| Miter Angle Range (Left) | 0 - 45 degrees |
| Miter Angle Range (Right) | 0 - 45 degrees |
| Bevel Angle Range | 0 - 45° (Left) |
| Max Cutting Depth at 90° | 3.5 inches |
| Max Cutting Depth at 45° | 2.5 inches |
| Power Source | Corded Electric |
| No Load Speed | 4, 000 RPM |
Covers knowing the tool, keeping guards, clean area, and safe environment.
Addresses proper apparel, safety glasses, securing work, and maintenance.
Guidelines for extension cords and polarized plugs for safe electrical use.
Details eye protection, guards, flammable liquids, blade checks, and securing workpiece.
Covers blade contact, handle firmness, freehand operation, and stopping procedures.
Steps for safely removing and installing the saw blade using the socket wrench.
Explains the function of the safety cover and the importance of its condition.
Instructions on loosening the knob, adjusting the turn base, and tightening for the desired miter angle.
Methods for securing workpieces, including using the optional vertical vise.
Covers releasing handle, blade contact checks, and gentle cutting pressure.
Instructions for setting and performing left bevel cuts, including safety warnings.
Explains how to cut various types of crown and cove moldings.
Steps to adjust the turn base and guide fence for accurate 0° miter cuts.
Details the terms, conditions, and limitations of the Makita one-year limited warranty.
To Next Page
