Need help?Do you have a question about the Makita LS1211 and is the answer not in the manual?
General| Type | Sliding Compound Miter Saw |
|---|---|
| Blade Diameter | 12 in |
| Arbor Size | 1 in |
| No Load Speed | 3, 200 RPM |
| Bevel Angle Range | Left 0-45° |
| Motor | 15 AMP |
Key safety guidelines and warnings for tool operation, covering tool knowledge, work area, apparel, and tool maintenance.
Further safety guidelines covering eye protection, tool operation, blade care, and cord handling.
Instructions for securing the saw to a stable surface and preparing it for use.
Step-by-step guide on how to safely install and remove the saw blade, including tool usage.
Details on the function, maintenance, and importance of the safety cover.
Instructions for attaching, filling, and emptying the dust collection bag.
Procedure for adjusting kerf boards to ensure proper blade alignment and prevent contact.
Ensuring the saw blade is set correctly for maximum cutting capacity.
Steps to set and secure the desired miter angle using the miter scale and grip.
Procedure for setting and securing the saw blade to the desired bevel angle.
How to install and use the vertical vise to securely hold workpieces.
Guide to installing and using the optional horizontal vise for workpiece securing.
Information on installing optional holders for supporting workpieces.
Explanation of the trigger switch, lock-off button, and their safe operation.
Procedure for performing press cuts on smaller workpieces safely and effectively.
Instructions for slide cutting wider workpieces, emphasizing safety.
Detailed steps for performing miter cuts, referring to angle adjustment sections.
Guide to performing bevel cuts, including angle settings and safety precautions.
Explanation of compound cutting and the angles for performing it.
Techniques for cutting crown and cove moldings using the compound miter saw.
Method for cutting aluminum extrusions, including lubrication and securing techniques.
Explanation of why and how to attach wood facing for cutting taller workpieces.
Using a set plate for efficiently cutting multiple pieces of the same length.
Steps for performing dado-type cuts by adjusting blade depth and using slide cuts.
Instructions on how to properly secure and carry the compound miter saw.
Procedure for aligning and adjusting the saw's miter and bevel angles.
Guidance on adjusting the hex lock nut for optimal handle movement and cutting accuracy.
Instructions for checking, replacing, and maintaining carbon brushes.
Procedures for cleaning the tool after use, lubricating moving parts, and recommended servicing.
Overview of optional accessories including dust bag, vises, holders, set plate, and blades with part numbers.
Comprehensive list of all parts for the Model LS1211 with item numbers and descriptions.
Details on the limited one-year warranty, coverage, exclusions, and user rights.
To Next Page
