Makita LS1211 User Manual

CAUTION :
During a bevel cut, it may create a condition whereby the piece cut off will come
to rest against the side of the blade. If the blade is raised while the blade
is still
rotating, this piece may be caught by the blade, causing fragments to be
scattered around which
is dangerous. The blade should be raised ONLY after the
blade has come to
a complete stop.
When pressing down the handle, apply pressure in parallel with the blade. If a force is
applied perpendicularly to the turn base or if the pressure direction is changed during
a cut, the precision of the cut will be impaired.
5. Compound cutting
Compound cutting
is the process in which a bevel angle is made at the same time in
which
a miter angle is being cut on a workpiece. Compound cutting can be performed
at angle shown in the table below.
Left and right 45O
Bevel angle
I Miter angle
Left and right
0' - 45'
Left and right 0" - 30°
Left and right 35"
1
Left and right Oo - 55'
Left and right Oa - 60'
16

Makita LS1211 Specifications

General

Brand	Makita
Model	LS1211
Category	Saw
Language	English