Makita LS1211 - Bench mounting saw; Bench Mounting the Saw

Socket wrench
Store the socket wrench in the wrench
holder
at the rear of the tool after using it.
Bench mounting saw ,
When the tool is shipped, the handle is
locked in the lowered position. Release the
handle from the lowered position by lower-
ing
it slightly and removing the chain from
the screw on the motor housing.
I
Wrench holder
1
I
I Chain
This tool should be bolted with two bolts to a
level and stable surface using the bolt holes
provided in the tool’s base. This will help pre-
vent tipping and possible injury.
6