Need help?Do you have a question about the Makita M2400 and is the answer not in the manual?
General safety guidelines for the work environment, including lighting and preventing distractions.
Precautions related to electrical connections, grounding, and cord usage to prevent shock.
Operate the tool with full attention, avoiding fatigue or impairment from substances.
Always wear eye protection and other appropriate gear for reduced injury risk.
Ensure the switch is off before connecting power or handling the tool.
Use the correct tool for the application for better and safer performance.
Check for damage or misalignment; have tools repaired before use to prevent accidents.
Properly maintained tools are less likely to bind and easier to control.
Have your power tool serviced by a qualified person using identical replacement parts.
Wear protective glasses and hearing protection during extended operation periods.
Use only wheels recommended by the manufacturer with a speed rating matching the tool.
Inspect wheels for cracks or damage before operation and replace immediately if found.
Explanation of how to operate the switch trigger and lock button for starting and stopping the tool.
Adjusting the stopper plate for cut-off wheel contact with workbench or floor for cutting capacity.
How to secure the cut-off tool to a level and stable surface using bolts.
Procedure to change the spacing or interval between the vise and guide plate for wider workpieces.
Procedure to loosen hex bolts and set the guide plate to the desired angle using a protractor.
Steps for removing and installing the cut-off wheel, including loosening the hex bolt.
How to operate the vise handle and nut to securely grip workpieces.
Using a spacer block for worn wheels or to utilize the wheel economically.
How to switch on the tool, lower the wheel into the cut, and bear down gently.
Maximum cutting capacity varies by angle and workpiece shape for a 355 mm wheel.
Procedure to check and replace carbon brushes when worn down to the limit mark.
To Next Page
General
