To Next PageTo Next Page
Need help?Do you have a question about the Makita MLT100 and is the answer not in the manual?
General| Input power | 1500 W |
|---|---|
| Idle speed (max) | 4300 RPM |
| Cutting depth (45º) | 64 mm |
| Cutting depth (90º) | 93 mm |
| Saw blade included | - |
| Product color | Blue, Silver |
Weight and Dimensions| Depth | 726 mm |
|---|---|
| Width | 984 mm |
| Height | 333 mm |
| Weight | 34100 g |
| Blade diameter | 260 mm |
| Blade diameter (min) | 30 mm |
Emphasizes reading the manual for personal safety and saving instructions.
Covers essential safety rules applicable to all tools.
Guidelines for locating, securing, and preparing the work area for the table saw.
Instructions for adjusting blade depth and bevel angle.
Components and overview of the table saw blade guarding system.
How to position and use the riving knife/spreader for different cuts.
Procedures for installing the blade guard and side guards.
Using antikickback pawls and storing guards and accessories.
Steps to install and ensure the rip fence is parallel to the blade.
Instructions for assembling the slide table.
Using work helpers and instructions for ripping cuts.
Instructions and safety for performing cross cutting.
How to use the miter gauge and perform non-through cuts.
Procedures for cleaning and lubricating the table saw.
Steps for replacing worn carbon brushes.
Information on table inserts and recommended accessories.
How to install featherboards and perform rabbeting cuts.
Details on table stand accessory and saw blade types.
