Makita MLT100 Technical Information

1 / 24
W
L
H
Model MLT100 has been developed as a cost-competitive sister
model of Models 2704/2705.
The
machine for USA and Canada features blade guard in
compliance with the latest UL Standards
.
TCT saw blade
Wrench
Dust bag
Holder
Note: The standard equipment may vary by country or model variation.
TCT saw blade
June 2016
MLT100
Table Saw 260mm (10-1/4")*
1
Table Saw 255mm (10")*2
*1 for European countries
*2 for all countries except European countries
Vise assembly
Triangular rule
Set plate
Dimensions: mm (")
Length (L)
726 (28-1/2)
Width (W)
984 (38-3/4)
Height (H)
333 (13-1/8)
Note: MLT100 for USA and Canada differs from
the image shown above in some details.
Voltage (V) Current (A) Cycle (Hz)
Continuous Rating (W)
Max Output (W)
Input
Output
110
4.1
50/60
430
220
340
120
4.0
50/60
N/A
220
340
230
2.0
50/60
430
220
340
*Weight according to EPTA-Procedure 01/2003
Area
Specifications
European countries
USA, Canada
Mexico, Panama
Other countries
Saw blade: mm (")
Diameter
260 (10-1/4)
255 (10)
Hole diameter
30 (1-3/16)
15.88 (5/8)
30 (1-3/16)
No load speed: min.-1=rpm
4,300
Bevel cutting capacity: degrees
0 to 45
Cutting capacities: mm (")
at 90 degrees
93 (3-5/8)
90.5 (3-9/16)
at 45 degrees
64 (2-1/2)
63 (2-1/2)
Soft start
Yes: all high voltage areas except UK and those in
Asia No: UK, Asia, all low voltage areas
Electric brake
Yes
Double insulation
Yes
Power supply cord: m (ft)
2.5 (8.2)
Net weight*: kg (lbs)
34.8 (76.7)

Makita MLT100 Specifications

General

Input power	1500 W
Idle speed (max)	4300 RPM
Cutting depth (45º)	64 mm
Cutting depth (90º)	93 mm
Saw blade included	-
Product color	Blue, Silver

Weight and Dimensions

Depth	726 mm
Width	984 mm
Height	333 mm
Weight	34100 g
Blade diameter	260 mm
Blade diameter (min)	30 mm