Need help?Do you have a question about the Makita MLS100 and is the answer not in the manual?
General| Input power | 1500 W |
|---|---|
| Power source | AC |
| Blade diameter | 255 mm |
| Idle speed (max) | 4200 RPM |
Weight and Dimensions| Weight | 14700 g |
|---|
Details cutting capacities for different bevel and miter angles.
Explains the meaning of various symbols used on the equipment.
Provides essential safety instructions for operating power tools.
Outlines crucial safety practices for the work environment.
Covers essential precautions for safe electrical operation and handling.
Key guidelines for operator safety, including alertness, PPE, and proper attire.
Instructions on correct tool operation, maintenance, and safe storage practices.
Guidance on professional servicing and proper lubrication procedures.
Essential safety rules for securing workpieces and maintaining a clear workspace.
Detailed safety procedures for workpiece handling, blade selection, and operation.
Covers safe cutting practices, material restrictions, and operational checks.
Defines the tool's purpose, workshop security, and operational checks for safety.
Instructions for attaching an auxiliary plate to the tool's base.
Steps for securely mounting the tool onto a workbench or stable surface.
Details the function and importance of the blade guard.
Explains the purpose and initial setup of the kerf board.
Guidance on checking and adjusting the blade for maximum cutting capacity.
Steps to set and secure the desired miter angle for cuts.
Steps to set and secure the desired bevel angle for cuts.
Explains the operation of the switch with a lock-off button.
Explains the operation of the switch without a lock-off button.
Describes the function and maintenance of the electric blade brake.
Instructions for safely installing and removing the saw blade.
Provides country-specific instructions for using the sub-fence.
How to connect a vacuum cleaner for efficient dust collection.
Instructions on attaching, emptying, and maintaining the dust bag.
Guidelines for securely holding workpieces for safe cutting operations.
Detailed steps for performing straight cuts on the workpiece.
Instructions for making angled cuts using the miter function.
Steps for performing cuts at a tilt angle using the bevel function.
Process for making cuts with both miter and bevel angles applied.
How to measure wall width for molding cuts.
Specific instructions for performing left bevel cuts on moldings.
Instructions for attaching wood facing to the guide fence.
How to use the set plate for cutting multiple pieces of the same length.
Procedures for realigning cutting angles if affected by rough handling.
Steps to adjust and align the miter angle accurately.
Safety precautions for securing the tool before carrying it.
How to set and adjust the tool to a 0° bevel angle.
How to set and adjust the tool to a 45° bevel angle.
Instructions for checking and replacing worn carbon brushes.
Steps for cleaning the tool and lubricating moving parts after use.
Information on recommended saw blades for various materials.
To Next Page
