Makita 5007S User Manual

Square Cut Saw
Blade
diameter
185 mm (744”) MODEL 5007s
weight
No load speed Overall
900 450 (RPM) length
Max. cutting capacities
INSTRUCTION MANUAL
185 mm
(7-1/4”)
DOUBLE
INSULATION
395 mm 5.5 kg
(15-112“) (12.1 Ibs)
5,800
58.5
mm 45.5 mm
(2-5/16”) (1-3/16“)
SPECIFICATIONS
* Workpieces up to 2 x 10 can be cut when the guide plate is installed.
Manufacturer reserves the right to change specifications without notice.
Note: Specifications may differ from country to country.

Makita 5007S Specifications

General

Brand	Makita
Model	5007S
Category	Saw
Language	English

Summary

Specifications

Important Safety Instructions

Voltage Warning

Alert regarding power source voltage matching tool specifications to prevent injury or damage.

Extension Cord Usage

Guidelines for selecting and using appropriate extension cords for outdoor use and proper wire sizing.

Additional Safety Rules

Blade and Cutting Area Safety

Rules about blade condition, keeping hands away from cutting area, and supporting panels to prevent accidents.

Kickback Prevention and Tool Operation

Guidance on using rip fences, avoiding kickback, and general operational safety.

Operational Safety Precautions

Safe Cutting Practices

Workpiece Support and Handling

Instructions on placing the saw base, clamping short pieces, and avoiding holding short pieces by hand.

Saw Operation Safety

Limited Warranty

Warranty Policy Details

Information on the one-year warranty coverage, exclusions, and limitations.