Need help?Do you have a question about the Makita 5007N and is the answer not in the manual?
General| Blade Diameter | 7-1/4 inches |
|---|---|
| Amperage | 15 Amps |
| No Load Speed | 5, 800 RPM |
| Arbor Size | 5/8 inches |
| Max Cutting Capacity at 90° | 2-3/8 inches |
| Max Cutting Capacity at 45° | 1-3/4 inches |
| Bevel Capacity | 0° - 45° |
| Weight | 11.1 lbs |
| Voltage | 120V |
Operator safety rules including alertness, PPE, and avoiding fatigue or impairment.
Ensuring a clean, well-lit area and keeping bystanders away.
Precautions for safe use related to electrical connections and power sources.
Essential safety practices and techniques for making cuts with the circular saw.
Understanding and preventing dangerous kickback reactions from the saw.
Properly setting blade depth and bevel angle for safe and accurate cuts.
Ensuring the lower guard operates correctly for maximum safety during use.
Steps to correctly set the blade depth for desired cut accuracy and safety.
Critical safety instructions for tethering the tool when working at height.
To Next Page
