Makita M372 User Manual

1
ENGLISH
INSTRUCTION MANUAL
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Trimmer
M372
005430

Makita M372 Specifications

General

Brand	Makita
Model	M372
Category	Trimmer
Language	English

Summary

Specifications

Symbols

Intended Use

Power Supply

General Safety Rules

Service

Additional Safety Rules

Functional Description

Adjusting Bit Protrusion

Adjust the bit protrusion by loosening the clamping screw and moving the tool base.

Switch Action

Operate the tool by moving the switch lever to the I (on) or O (off) position.

Assembly

Installing or Removing Trimmer Bit

Procedure for installing and removing the trimmer bit using wrenches.

Operation

Templet Guide

Use the templet guide for trimming with templet patterns.

Straight Guide (Accessory)

Use the straight guide for straight cuts, chamfering or grooving.

Circular Work

Perform circular cuts using the straight guide and guide plate.

Trimmer Guide

Use the trimmer guide for trimming curved cuts in veneers.

Maintenance

Replacing Carbon Brushes

Check and replace worn carbon brushes following the procedure.

Accessories

Straight Bit

Details and specifications for the straight router bit.

Chamfering Bit

Details and specifications for the chamfering bit.

Cove Beading Bit

Details and specifications for the cove beading bit.

Ball Bearing Flush Trimming Bit

Details and specifications for the ball bearing flush trimming bit.

Ball Bearing Corner Rounding Bit

Details and specifications for the ball bearing corner rounding bit.

Ball Bearing Chamfering Bit

Details and specifications for the ball bearing chamfering bit.

Ball Bearing Beading Bit

Details and specifications for the ball bearing beading bit.

Ball Bearing Cove Beading Bit

Details and specifications for the ball bearing cove beading bit.

Ball Bearing Roman Ogee Bit

Details and specifications for the ball bearing roman ogee bit.