Makita DUR190LZX3 User Manual

24 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

INSTRUCTION MANUAL

Cordless Grass Trimmer

DUR190U

DUR190L

DUR191U

DUR191L

ENGLISH: Original instructions

Read before use.

Table of Contents

Questions and Answers:

J
janet34Jul 25, 2025
Why my Makita DUR190LZX3 Trimmer motor does not run?
- V
  vwarrenJul 25, 2025
  If your Makita Trimmer's motor does not run, it could be due to several reasons: * The battery cartridge might not be properly installed. Ensure it is correctly installed. * There may be a battery issue, such as undervoltage. Try recharging the battery. If it remains ineffective, replace the battery. * The drive system may not be functioning correctly, in that case, consult your local authorized service center for repair.
J
Juan HoodJul 30, 2025
What to do if the cutting tool does not rotate on Makita DUR190LZX3?
- R
  Richard CoffeyJul 30, 2025
  If the cutting tool of your Makita Trimmer does not rotate, immediately stop the machine. A foreign object, like a branch, might be jammed between the guard and the cutting tool. Remove any such object. If the issue persists, the drive system may not be working correctly.
M
Matthew NunezAug 4, 2025
Why does my Makita Trimmer motor stop after a little use?
- M
  Michelle PalmerAug 4, 2025
  Your Makita Trimmer may stop running shortly after starting due to: * Low battery charge: Recharge the battery, and if that doesn't work, replace it. * Overheating: Stop using the tool and allow it to cool down.
W
walkermelindaAug 9, 2025
What to do if the Makita DUR190LZX3 cutting tool and motor cannot stop?
- C
  changjoshuaAug 9, 2025
  If the cutting tool of your Makita Trimmer and the motor won't stop, immediately remove the battery. This indicates an electric or electronic malfunction, and you should seek repair from your local authorized service center.
R
reyesthomasAug 14, 2025
What to do if Makita DUR190LZX3 Trimmer has abnormal vibration?
- A
  Alex CastanedaAug 14, 2025
  If your Makita Trimmer is vibrating abnormally, it could be due to a broken nylon cord. Try tapping the nylon cutting head against the ground while it is rotating to feed the cord. If the issue persists, the drive system may not be working correctly.
F
frank38Aug 19, 2025
Why Makita DUR190LZX3 does not reach maximum RPM?
- J
  Justin GrantAug 19, 2025
  If your Makita Trimmer does not reach maximum RPM, consider the following: * Improper battery installation: Install the battery cartridge as described in the manual. * Dropping battery power: Recharge the battery, and if that's ineffective, replace it. * Faulty drive system: Seek repair from your local authorized service center.

Makita DUR190LZX3 Specifications

General

Type	Grass Trimmer
Power Source	Battery
Battery Voltage	18V
Motor Type	Brushless
Line Diameter	2.0 mm
Spindle Size	M10 x 1.25

Summary

SPECIFICATIONS

Applicable Battery and Charger

Lists compatible battery cartridges and chargers for the tool models.

Recommended Battery Adapter

Details the recommended battery adapter for the tool.

Noise Data

Presents noise emission levels for different models and cutting tools.

VIBRATION DATA

Vibration Levels by Model

Provides vibration emission data for various models and cutting tools.

SAFETY INFORMATION

Symbols and General Warnings

Explains symbols and general safety warnings for the power tool.

Work Area and Personal Safety

Details safe practices for the work environment and personal protective equipment.

Electrical and Battery Safety

Critical safety measures for electrical and battery components.

POWER TOOL USE AND CARE

General Use and Maintenance

Instructions for proper use, maintenance, and care of the power tool.

Battery Tool Use and Care

Guidelines for safe handling, charging, and maintenance of battery packs.

OPERATIONAL SAFETY

Intended Use and General Instructions

Defines the tool's purpose and provides general operating advice.

PPE and Work Area Precautions

Details required PPE and safe practices for the work environment.

OPERATION AND TOOLS

Putting Into Operation

Steps and precautions before starting and during initial use of the tool.

Cutting Tool Selection

Information on selecting and using appropriate cutting tools.

OPERATIONAL SAFETY AND MAINTENANCE

Kickback Prevention and Vibration

Explains kickback and provides methods to avoid it, plus vibration effects.

Transport and Maintenance

Guidelines for safe transport and routine maintenance of the tool.

STORAGE, FIRST AID, AND BATTERY CARE

Storage, First Aid, and Battery Safety

Procedures for storing the tool, first aid measures, and battery safety.

Battery Life Tips

Tips for maximizing battery life and proper charging practices.

PARTS DESCRIPTION

Component Identification

Identifies and labels all parts of the tool for easy reference.

FUNCTIONAL DESCRIPTION

Battery Cartridge Handling and Protection

Instructions for installing, removing, and managing the battery cartridge and its protection.

Tool Protection Systems

Explains the tool's protection systems, overload, overheat, and overdischarge features.

CONTROL AND ADJUSTMENT

Battery Indicators and Switch Operation

Details battery capacity indicators, main power switch, and switch action.

Speed Adjustment

Explains how to adjust the tool's speed settings.

OPERATIONAL FEATURES AND ASSEMBLY

Speed Modes and Electric Brake

Describes different speed modes, ADT, and the electric brake function.

Handle Assembly

Step-by-step guide for attaching the handle to the tool.

ASSEMBLY DETAILS

Attachment Pipe and Barrier Mounting

Instructions for attaching the attachment pipe and safety barrier.

ACCESSORY INSTALLATION

Protector and Cutter Blade Installation

Guides on installing the protector and the cutter blade.

CUTTING TOOL INSTALLATION

Plastic Blade and Nylon Head Installation

Steps for installing plastic blades and nylon cutting heads.

HANDLE AND HANGER ADJUSTMENT

Adjusting Handle/Hanger Position

Instructions for adjusting handle and hanger for comfortable use.

OPERATION AND STORAGE

Hex Wrench Storage and Harness

Guides on storing the hex wrench and attaching/detaching the shoulder harness.

CORRECT TOOL HANDLING

Handling Techniques and Nylon Head Use

Proper techniques for handling the tool and using the nylon cutting head.

MAINTENANCE

Replacing the Nylon Cord

Step-by-step instructions for replacing the nylon cord.

REPLACEMENT AND TROUBLESHOOTING

Plastic Blade Replacement

Instructions for replacing a worn or broken plastic blade.

Troubleshooting Guide

Lists common problems, their causes, and remedies for the tool.

OPTIONAL ACCESSORIES

Recommended Accessories

Lists recommended accessories for use with the tool.

Related product manuals

Preview: Makita DUR190L

Preview: Makita DUR190U

Preview: Makita DUR193

Preview: Makita DUR194

Preview: Makita DUR192L

Preview: Makita DUR191U

Preview: Makita DUR192LZ

Makita DUR192LZ

Makita DUR191UZX3

Preview: Makita DUR181

Preview: Makita DUR187L

Preview: Makita DUR182L