Why does my Makita DUR192LZ Trimmer motor stop running after a little use?
If the Makita Trimmer motor stops running after a short time, the battery's charge level may be low. Recharge the battery, and if that doesn't solve the problem, replace the battery. Overheating could also be a factor; if so, stop using the tool and allow it to cool down.
What to do if Makita DUR192LZ Trimmer cutting tool does not rotate?
If the cutting tool on your Makita Trimmer isn't rotating, stop the machine immediately. Check for any foreign objects, like a branch, jammed between the guard and the cutting tool and remove them. Also, ensure the cutting tool is securely tightened. If the problem persists, the drive system may not be functioning correctly and needs repair by an authorized service center.
Why Makita DUR192LZ Trimmer motor does not run?
If the Makita Trimmer's motor isn't running, first, ensure the battery cartridge is correctly installed. If that's not the issue, the battery may be low or faulty; try recharging it, and if that doesn't work, replace the battery. If problems persist, it could be an issue with the drive system, which requires repair by an authorized service center.
What to do if my Makita Trimmer does not reach maximum RPM?
If your Makita Trimmer isn't reaching maximum RPM, make sure the battery is correctly installed as described in the manual. A low battery could also be the cause; try recharging it, and if that doesn't work, replace it. If the issue continues, the drive system may not be working correctly, requiring repair by an authorized service center.
What to do if Makita DUR192LZ Trimmer has abnormal vibration?
If you notice abnormal vibration in your Makita Trimmer, it could be due to several reasons. One end of the nylon cord might be broken, in which case you should tap the nylon cutting head against the ground while it is rotating to cause the cord to feed. Alternatively, the cutting tool might be broken, bent, or worn, requiring replacement. Also, check if the cutting tool is loosely attached and tighten it securely. If none of these address the vibration, the drive system may not be working correctly, requiring repair by an authorized service center.
What to do if Makita DUR192LZ Trimmer cutting tool and motor cannot stop?
If the cutting tool and motor of your Makita Trimmer won't stop, remove the battery immediately. This could be due to an electric or electronic malfunction, and it requires repair by an authorized service center.
Details on model, dimensions, performance, and weight.
Lists compatible Makita battery cartridges and chargers.
Recommends the PDC01 battery adapter for use.
Provides sound pressure and power levels for the nylon cutting head.
Details on vibration emission levels for left and right hands.
Explanation of symbols used on the equipment for user understanding.
Statement regarding the EC declaration for European countries.
Essential general safety warnings for power tool operation.
Crucial safety advice for the proper use of the tool.
Defines the specific purpose for which the tool is designed.
Provides general advice for operating the tool safely.
Lists essential PPE for safe operation of the tool.
Guidelines for safe work areas and electrical precautions.
Steps for assembling and preparing the tool for use.
Guidelines for safe handling, control, and effective use.
Procedures for emergencies and addressing abnormal tool behavior.
Instructions on using appropriate and safe cutting tools.
Proper methods for transporting the tool safely.
Procedures for tool maintenance and repair by authorized centers.
Recommendations for storing the tool safely and securely.
Essential first aid steps and information to provide.
Critical safety instructions for battery cartridge handling and use.
Tips for maximizing the lifespan and performance of the battery.
Explanation of the system that protects the tool and battery.
Details on how the tool handles overload conditions.
Information on tool or battery overheat protection.
Explanation of the protection against excessive battery discharge.
How to check the remaining battery capacity using indicator lamps.
Operation of the main power switch and safety lock-off lever.
How to select and adjust the tool's speed levels.
Description of the tool's electric brake system.
Details on constant speed control and soft start features.
Instructions for assembling the pipes of the tool.
Steps to adjust the handle and hanger for a comfortable grip.
Guidance on installing the protective guard for safety.
Instructions for installing and removing the cutting tool.
Procedure for installing and securing the nylon cutting head.
Proper storage of the hex wrench to prevent loss or injury.
Steps for attaching and adjusting the shoulder harness.
Proper techniques for handling the tool for maximum control and safety.
Specific usage instructions for the nylon cutting head.
Methods for cleaning the tool to maintain performance and prevent damage.
Instructions for replacing the nylon cord on the cutting head.
Guidelines for tool maintenance and authorized repair services.
Identifies common problems, their causes, and remedies.
Lists recommended accessories for use with the tool.
General| Type | String trimmer |
|---|---|
| Handle type | - |
| Cutting width | 300 mm |
| Product color | Black, Blue |
| Rotational speed | 6000 RPM |
| Cutting diameter (max) | - mm |
| Power source | Battery |
| Battery voltage | 18 V |
| Battery capacity | 6 Ah |
Weight and Dimensions| Length | 1705 mm |
|---|---|
| Weight | 3000 g |
To Next Page
