Why Makita DUR194 Trimmer does not reach maximum RPM?
If your Makita Trimmer isn't reaching its maximum RPM, check if the battery is installed properly according to the manual. Also, the battery power might be dropping, so try recharging or replacing the battery. If the issue persists, the drive system may not be functioning correctly.
What to do if cutting tool does not rotate on Makita DUR194?
If the cutting tool on your Makita Trimmer isn't rotating, stop the machine immediately! A foreign object, like a branch, may be jammed between the guard and the cutting tool. If so, remove the foreign object.
What to do if my Makita DUR194 motor does not run?
If the motor of your Makita Trimmer doesn't start, possible causes include: the battery cartridge might not be installed—ensure it is properly installed. The battery may be under voltage—try recharging it, and if that doesn't work, replace the battery. If these steps don't resolve the issue, the drive system may not be working correctly.
Why does my Makita DUR194 motor stop running after a little use?
If your Makita Trimmer motor stops shortly after starting, it could be due to a low battery charge—recharge the battery, and replace it if recharging isn't effective. Another cause might be overheating—stop using the tool and allow it to cool down.
What to do if cutting tool and motor cannot stop on Makita DUR194?
If the cutting tool and motor of your Makita Trimmer won't stop, immediately remove the battery. This issue may indicate an electric or electronic malfunction.
What to do if Makita Trimmer has abnormal vibration?
If your Makita Trimmer is vibrating abnormally, stop the machine immediately! This could be because one end of the nylon cord has broken. To fix this, tap the nylon cutting head against the ground while it is rotating to feed the cord.
General| Type | String trimmer |
|---|---|
| Cordless | Yes |
| Head type | Blade & nylon line |
| Handle type | D-loop handle |
| Product color | Black, Green |
| Uncertainty K | 1.5 m/s² |
| Sound power level | 88.6 dB |
| Vibration emission | 2.5 m/s² |
| Sound pressure level | 75.8 dB |
| Cutting diameter (max) | 280 mm |
| Sound power level uncertainty | 1.5 dB |
| Power source | Battery |
| Battery voltage | 18 V |
Weight and Dimensions| Depth | 236 mm |
|---|---|
| Width | 288 mm |
| Length | 1630 mm |
| Weight | 2200 g |
Lists compatible Makita battery cartridges and chargers.
Details compatible cord-connected power sources for the tool.
Explains the meaning of various symbols found on the tool and in the manual.
Safety measures to ensure a safe working environment.
Essential electrical safety practices for using the power tool.
Recommendations for operator safety, including PPE and attentiveness.
Instructions for maintaining and servicing the power tool.
Specifies the proper applications and limitations for the tool.
Guidelines for maintaining and servicing the battery cartridge.
Details the essential personal protective equipment for safe operation.
Safety measures for the operational environment.
Safety instructions related to electrical connections and battery handling.
Actions to take in emergencies and for routine checks.
Proper techniques for handling and controlling the tool during operation.
Procedures after impact and recommendations for operator rest.
Explains the phenomenon of kickback and its causes.
Provides methods and techniques to prevent kickback.
Describes potential health effects of vibration and how to reduce exposure.
Guidelines for safely transporting the tool.
Instructions for routine tool cleaning and maintenance.
Recommendations for storing the tool when not in use.
Steps to take in case of injury.
Key information to provide when seeking help.
Critical safety measures for handling battery cartridges.
Instructions for proper battery disposal and product compatibility.
Advice on optimal charging methods for battery longevity.
Identifies and names each part of the tool.
Step-by-step guide to attach the barrier to the tool.
Instructions for correctly installing the tool's protector.
Steps for attaching the cutting attachment to the tool.
Procedures for securely mounting the cutter blade.
Steps to install the nylon cutting head onto the spindle.
Instructions for attaching the plastic blade.
Guidance on properly storing the hex wrench to prevent loss.
How to install and remove the battery cartridge correctly.
Explains overload protection and how to reset.
Details overheat protection and cooling procedures.
Describes overdischarge protection and battery charging.
Addresses other causes for tool stoppage and troubleshooting.
How to check the remaining battery charge level.
How to adjust the tool's speed using the lever.
Information on the electric brake system and its servicing.
Instructions for attaching and adjusting the shoulder harness.
Proper techniques for positioning and controlling the tool.
Guidelines for maintaining safe distances from other operators.
How to feed the nylon cord using the bump feed mechanism.
Procedures for replacing the nylon cord on the cutting head.
How to align the plastic blade correctly during installation.
Steps for properly grinding the metal blade.
Common motor and operational problems and their solutions.
Solutions for cutting tool and motor control problems.
Lists recommended accessories for use with the tool.
To Next Page
