To Next PageTo Next Page
Need help?Do you have a question about the Makita RBC2100 and is the answer not in the manual?
General safety guidelines for operating the brush cutter/grass trimmer.
Specifies the intended purpose and limitations of the machine.
Details essential protective clothing and gear for safe operation.
Precautions to take before and during the initial start of the machine.
Procedures and precautions for safely handling fuel and refuelling the machine.
Guidelines for the safe and proper storage of fuel.
Instructions on how to operate the machine correctly and safely.
Explains kickback hazards and methods to prevent them.
Details on appropriate cutting tools and their usage.
Guidance on immediate actions in case of an accident.
Information on vibration-related health risks and mitigation.
Manufacturer's declaration of compliance with EU directives.
Identifies and labels all parts of the RBC2100 model.
Identifies and labels all parts of the RBC2110 model.
Instructions for attaching the handle to U-handle models.
Instructions for attaching the handle to loop-handle models.
Guidelines for safe handling of fuel and avoiding health hazards.
Correct ratio and preparation of fuel-oil mixture for the engine.
Steps for safely refuelling the machine.
Advice on storing fuel for optimal use and safety.
Proper methods for carrying and controlling the machine.
Steps for preparing and starting the machine.
Specific instructions for starting a cold engine.
Procedure for starting a warm engine.
How to safely stop the engine and the machine.
How to adjust the engine idle speed correctly.
Instructions on resharpening and balancing cutting tools.
How to use and manage the nylon cutting head.
Steps for refilling the nylon cutting head with cord.
Routine checks and maintenance tasks performed daily.
Procedure for cleaning the air filter element.
How to check, adjust, and clean the spark plug.
Instructions for supplying grease to the gear case.
Inspection and replacement of the fuel filter element.
How to clean carbon deposits from the muffler.
Steps for preparing the machine for long-term storage.
Overview of routine maintenance tasks and their frequency.
Common faults, their causes, and observations.
General
