Makita RBC2500 User Manual

Important:
Read this instruction manual carefully before putting the Brush Cutter/String Trimmer into operation and strictly observe the safety regulations!
Preserve instruction manual carefully!
Important :
Lisez attentivement les instructions du présent manuel avant de vous servir de la débroussailleuse thermique pour la première fois, et
respectez à la lettre les consignes de sécurité ! Conservez précieusement ce manuel d’instructions !
Importante:
Lea esta manual de instrucciones con atención antes de utilizar la desbrozadora y ¡observe estrictamente las regulaciones de seguridad!
¡Conserve cuidadosamente su manual de instrucciones!
RBC2500 RBC2510
Owner’s and Safety Manual
for Brush Cutter/String Trimmer
Manuel d’emploi et de sécurité
du Débroussailleuse Thermique
Manual de empleo y de seguridad
para Desbrozadora

Makita RBC2500 Specifications

General

Brand	Makita
Model	RBC2500
Category	Trimmer
Language	English

Summary

Safety Instructions

General Instructions

General guidelines for safe operation and user responsibilities.

Intended Use of the Machine

Specifies the approved uses for the brush cutter/string trimmer.

Personal Protective Equipment

Details essential protective gear required for safe operation.

Starting Up the Brush Cutter

Steps and precautions before starting the brush cutter.

Refuelling

Handling Fuel

Precautions and advice for handling fuel safely.

Fuel and Oil Mixture

Information on the correct fuel and oil mixture ratio for the engine.

Refuelling Procedure

Method of Operation

Kickback (Blade Thrust)

Explanation of kickback phenomenon and its causes during operation.

Kickback Prevention

Methods and advice to prevent dangerous kickbacks.

Cutting Tools

Maintenance Instructions

Routine checks and maintenance required before commencing work.

First Aid

Assembly of Engine and Shaft

Mounting of Handle

Mounting of Protector

Mounting of Cutter Blade or Nylon Cutting Head

Fuels/Refueling

Correct Handling of Machine

Points in Operation and How to Stop

Starting

Procedure for starting the brush cutter, including cold start.

Stopping

Adjustment of Low-Speed Rotation (Idling)

Resharpening the Cutting Tool

Nylon Cutting Head

Operation

Replacing the Nylon Cord

Servicing Instructions

Daily Checkup and Maintenance

Cleaning of Air Cleaner

Checking the Spark Plug

Storage

Storage Procedure

Maintenance Schedule