To Next PageTo Next Page
Need help?Do you have a question about the Makita RBC3101 and is the answer not in the manual?
General guidelines for safe operation and user responsibilities.
Specifies approved uses and prohibits other applications to prevent injury.
Details required clothing and gear for operator safety.
Ensures machine safety and a clear, safe environment before starting.
Steps for safely refuelling the machine away from ignition sources.
Correct ratio and preparation of fuel-oil mixture for the engine.
Proper storage of fuel in approved containers.
Guidelines for operating the brush cutter safely and effectively.
Explains kickback hazards and methods to prevent them.
Selecting and using the appropriate cutting tools for different materials.
Procedures to follow in case of an accident and information to provide.
Information on how the machine is packaged and prepared for transport.
Statement of compliance with applicable EU safety and health directives.
Step-by-step guide for assembling the engine and shaft components.
Instructions for correctly mounting the control cable to the machine.
Guide for connecting the switch cord to the engine's electrical system.
Procedure for mounting the handle on U-handle type brush cutters.
Procedure for mounting the handle on loop-handle type brush cutters.
Essential safety measures when handling fuel and oil.
Correct mixing ratios and procedures for fuel and two-stroke engine oil.
Detailed steps for safely refuelling the machine.
Guidelines for storing fuel safely and for limited periods.
Proper methods for handling and attaching the shoulder strap.
Step-by-step guide for starting and stopping the engine safely.
Instructions for starting the engine when it is already warm.
How to properly shut down the engine after use.
Procedure for setting and checking the engine's idle speed.
How to operate the nylon cutting head for efficient grass trimming.
Step-by-step guide for replacing the nylon cutting cord.
Routine checks and cleaning performed daily after use.
Instructions for cleaning the air filter element.
How to inspect, gap, and maintain the spark plug.
Procedure for lubricating the gear case with grease.
Checking and replacing the fuel filter for optimal fuel supply.
How to clean carbon deposits from the muffler.
General
