Makita RBC3100 User Manual

ISTRUZIONI D’USO
MANUAL DE INSTRUCCIONES
Brush Cutter
Decespugliatore
Desbrozadora
RBC2500
RBC2500
RBC2510
A
English / Italiano / Spanish
String Trimmer
Tagliabordi
Cortabordes
RBC2510
INSTRUCTION MANUAL
ISTRUZIONI D’USO
MANUAL DE INSTRUCCIONES
Important:
Read this instruction manual carefully before putting the Brush Cutter/String Trimmer into operation and strictly observe the safety
regulations!
Preserve instruction manual carefully!
Importante:
Prima di mettere in funzione il decespugliatore/tagliabordi, leggere attentamente il presente manuale; rispettare rigorosamente le norme
di sicurezza!
Conservare il manuale delle istruzioni per l’uso!
Importante:
Leer cuidadosamente este manual de instrucciones antes de poner en marcha la máquina y observar estrictamente las normas de
seguridad.
Conservar este manual de instrucciones con cuidado.

Makita RBC3100 Specifications

General

Brand	Makita
Model	RBC3100
Category	Trimmer
Language	English

Summary

Instruction Manual

Symbols

Safety Instructions

General Instructions

General safety advice for correct operation, user responsibility, and avoiding risks.

Intended Use of the Machine

Specifies the machine is for cutting grass, weeds, bushes, and undergrowth only.

Personal Protective Equipment

Details necessary protective equipment like helmet, visor, ear protection, gloves, and boots.

Starting Up the Brush Cutter

Instructions for safe startup, including checking the tool and ensuring a safe area.

Refuelling

Method of Operation

Kickback Hazards

Explains kickback and the risk of injury from specific cutting segments.

Kickback Prevention

Provides guidance on operating within safe blade segments to avoid kickbacks.

Cutting Tools

Lists approved cutting tools for RBC2500 and RBC2510.

Maintenance Instructions

First Aid

Packaging and Declarations

Technical Data

Designation of Parts

Assembly of Engine and Shaft

Mounting the Control Cable

Instructions for attaching the control cable to the adjusting cable.

Connection of the Switch Cord

Procedure for connecting the switch cords from the engine.

Mounting of Handle

Mounting of Protector

Mounting of Cutter Blade or Nylon Cutting Head

Fuels and Refuelling

Handling Fuel Safely

Precautions for handling fuel, avoiding contact, and inhalation.

Fuel and Oil Mixture Ratio

Details the correct fuel and oil mixture ratio for engine lubrication and performance.

Refuelling Procedure

Step-by-step instructions for safely refuelling the machine.

Fuel Storage Guidelines

Guidance on storing fuel safely and for limited periods.

Correct Handling of Machine

Shoulder Strap Adjustment

How to adjust the shoulder strap for proper blade positioning and control.

Emergency Detachment

Emergency procedure for detaching the machine and maintaining control.

Operation and Stopping

Starting the Engine

Steps for safely starting the engine after refuelling.

Cold Start Procedure

Specific instructions for starting a cold engine using choke and primer.

Warm Engine Start

Procedure for starting the engine when it is already warm.

Stopping the Engine

Instructions on how to safely stop the engine and cutting head.

Idle Speed Adjustment

Checking and Adjusting Idle Speed

How to check and adjust the idle speed to prevent cutting tool rotation.

Resharpening the Cutting Tool

Nylon Cutting Head

Nylon Cutting Head Operation

Instructions on operating the nylon cutting head and feeding cord.

Replacing Nylon Cutting Cord

Step-by-step guide for replacing the nylon cutting cord spool.

Servicing Instructions

Daily Checks and Maintenance

Daily tasks to check machine condition, safety features, and cleaning.

Air Cleaner Cleaning

Procedure for cleaning the air filter element to ensure proper engine function.

Spark Plug Check

How to check, gap, clean, or replace the spark plug.

Gear Case Greasing

Instructions for supplying grease to the gear case at regular intervals.

Fuel Filter Inspection

Guidance on inspecting and replacing the fuel filter for proper fuel supply.

Muffler Exhaust Port Cleaning

How to clean carbon deposits from the muffler exhaust port.

Storage Procedures