10 ENGLISH
Hold the trimmer with both hands and pull the switch
trigger A or B and then move it in front of your body.
1
2
3
►1. Trimming direction 2. Hedge surface to be
trimmed 3. Tilt the blades
As a basic operation, tilt the blades towards the trim-
ming direction and move it calmly and slowly at the
speed rate of 3 - 4 seconds per meter.
1
►1. String
To cut a hedge top evenly, it helps to tie a string at the
desired hedge height and to trim along it, using it as a
reference line.
Attaching the chip receiver (optional accessory) on the
toolwhentrimmingthehedgestraightcanavoidcuto
leaves’ being thrown away.
To cut a hedge side evenly, it helps to cut from the
bottom upwards.
Trim boxwood or rhododendron from the base toward
thetopforaniceappearanceandgoodjob.
To Next Page
Loading...
Need help?
General
