Need help?Do you have a question about the Makita UH4261 and is the answer not in the manual?
General| Cutting Width | 420 mm |
|---|---|
| Weight | 3.5 kg |
| Blade Length | 420 mm |
| Strokes per Minute | 1, 600 spm |
| No-load speed | 7000 rpm |
Lists the specific hedge trimmer models covered by this manual.
Details the technical data and measurements for the hedge trimmers.
Provides explanations for the various safety symbols used on the equipment.
Essential safety advice for operating any power tool.
Critical safety precautions unique to operating hedge trimmers.
Guidelines for user's personal safety during operation.
How to operate the tool's switch triggers for power and control.
Methods for performing straight and vertical cuts on hedges.
Instructions for connecting and securing the extension cord.
Using waist and arm cord hooks for safety and convenience.
Guidelines and precautions for using the hedge trimmer during operation.
How to install, use, and remove the chip receiver accessory.
Steps for cleaning the hedge trimmer after use.
Procedures for oiling and caring for the cutting blades.
Proper methods for storing the hedge trimmer.
To Next Page
